We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The The Fluke Ti 9 is the ideal entry-level instrument for electricians and HVAC/R, plant technicians
***Not available for Export Sales***
You won’t find a better or more rugged entry-level thermal imager than the Fluke Ti-9. Just point and shoot to capture the full picture, showing the hotspots that warn of equipment failure well before a catastrophic and expensive failure.. The 160 x 120 resolution shows all the essential temperature measurement details. That greatly increases the speed of pin pointing, inspecting, repairing and verifying electrical and (electro) mechanical equipment. Using a thermal imager as a diagnostics service tool or a preventative maintenance device extends equipment lifetime and avoids electrical fires and motor/compressor/bearing failures.
The Fluke Ti-9 is Rugged and easy to use. Just point and shoot. The Ti-9 is rated to IP54 and resists dust and water and withstands a drop test of 2 meters.
Temperature | |
Temperature measurement range (not calibrated below -10 °C) | -20 °C to +250 °C (-4 °F to + 482 °F) |
Accuracy | ± 5 °C or 5 % (whichever is greater) |
Imaging performance | |
Field of view | 23° x 17° |
Spatial resolution (IFOV) | 2.5 mRad |
Minimum focus distance | Thermal lens: 15 cm (6 in) |
Focus | Manual |
Image frequency | 9 Hz refresh rate |
Detector type | 160 X 120 focal plane array, uncooled microbolometer |
Infrared lens type | 20 mm F = 0.8 lens |
Thermal sensitivity (NETD) | ≤ 0.2 °C at 30 °C (200 mK) |
Infrared spectral band | 7.5 μm to 14 μm |
Image presentation | |
Palettes | Ironbow, blue-red, high contrast, grey |
Level and span | Smooth auto-scaling and manual scaling of level and span |
Minimum span (in manual mode) | 5 °C (9 °F) |
Minimum span (in auto mode) | 10 °C (18 °F) |
Image and data storage | |
Storage medium | SD memory card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR or 3000 basic (.bmp) IR images) |
File formats | Non-radiometric (.bmp) or fully-radiometric (.is2) |
Export file formats w/SmartView® software | JPEG, BMP, GIF, PNG, TIFF, WMF, EXIF, and EMF |
General specifications | |
Temperature -Operating: | -10 °C to 50 °C (14 °F to 122 °F) |
Temperature - Storage: | -20 °C to +50 °C (-4 °F to 122 °F) without batteries |
Display | 9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCD with backlight (selectable bright or auto) |
Controls and adjustments |
|
Software | SmartView® full analysis and reporting software included |
Battery: | Internal rechargeable battery pack (included) |
Battery life: | Three to four hours continuous use (assumes 50 % brightness of LCD) |
Battery charge time using ac adapter/charger and dc car charger: | Two hours for full charge |
AC operation/charging | AC adapter/charger (110 Vac to 220 Vac, 50 Hz to 60 Hz). Charges battery while imager is operating. Universal ac mains adapters included. |
Power saving | Sleep mode activated after 5 minutes of inactivity, automatic power off after 20 minutes of inactivity |
Safety standards | CE Directive: IEC/EN 61010-1 2nd Edition Pollution Degree 2 |
Electromagnetic compatibility |
|
Vibration | 2 G, IEC 68-2-29 |
Shock | 25 G, IEC 68-2-29 {2 m (6.5 ft) drop, 5 sides} |
Dimensions (HxWxL) | 0.27 m x 0.13 m x 0.15 m (10.5 in x 5 in x 6 in) |
Weight | 1.2 kg (2.65 lb) |
IP rating | IP54 |
Warranty | Two-years |
Calibration cycle | Two-years (assumes normal operation and normal aging) |
Supported languages | English, Italian, German, Spanish, French, Russian, Portuguese, Swedish, Turkish, Czech, Polish, Finnish, Simplified Chinese, Traditional Chinese, Korean, and Japanese |
Write Your Own Review