The T+PRO-1AC Kit combines two troubleshooting tools, in one convenient combo pack. The T+PRO Electrical Tester has all of the advantages of a traditional solenoid tester, with added functionality, but none of the typical drawbacks. With voltage measurement, continuity, built-in flashlight, GFCI trip capability, and the legendary ruggedness and reliability of Fluke, the tester is an excellent choice for most residential, commercial, and industrial applications. The 1AC-II is the pocket-sized voltage detector that can quickly test for energized circuits – a “must have for any electrician.
Specifications
Operating principle Senses the steady state electrostatic field produced by acvoltage through insulation without requiring contact to thebare conductor. A red glow at the tip and a beeping noise (ifnot switched OFF) indicates the presence of voltage. Note: Does not respond to randomelectrostatic discharge. Voltage sensing ranges Nominally, 90 V AC to 1000 V AC or 200 V AC to 1000 V AC depending on model, 45 Hz to 405 Hz; also a 20 V to 90 V control circuit model Detector tip style Blade or round, depending on model Light source One high intensity red LED
Agency approvals/listings c CSA us, CE, C-Tick
Safety rating 1000 V, CAT IV
IP rating IP 40
Operating temperaturerange -10 °C to 50 °C
Operating humidity ranges 0 % to 95 % (0 °C to 30 °C) 0 % to 75 % (30 °C to 40 °C) 0 % to 45 % (40 °C to 55 °C)
Operating altitude 3000 meters
Batteries 2 AAA alkaline batteries included
Fluke T+/PRO Specifications
Specifications
Temperature
Operating
-10°C to 55°C (14°F to 131°F)
Storage
-30°C to 60°C (-22°F to 140°F)
Relative Humidity
90%
0°C to 30°C (32°F to 86°F)
75%
30°C to 40°C (86°F to 104°F)
45%
40°C to 50°C (104°F to 122°F)
Altitude
Operating
2,000 m (approx. 6,561.6 ft)
Storage
10,000 m (approx. 32,808.4 ft)
Battery Type/Life
AAA (2); 40 hours
Shock, Vibration
Sinusoidal vibration per MIL-PRF-28800F for a Class 2 instrument
Safety
ISA-82.02.01 (IEC 61010-1 Mod) Second Edition, CAN/CSA-C22.2 No. 61010-1 Second Edition, IEC 61010 - 1 to 1000 V CAT III/600 V CAT IV Compliance to NFPA 70E1
AC Bandwidth
45 Hz to 66 Hz
Maximum Working Voltage
1000 V AC/DC
Maximum Measurable Voltage
600 V AC/DC
Duty Cycle
Indefinitely for voltages up to 240 V
For voltages between 240 V and 600 V the duty cycle is 30 s on / 300 s off
For voltages above 240 V the tester must connect to a voltage source only for a MAXIMUM of 30 s and then disconnect for a MINIMUM of 300 s
LEDs turn on between 90% and 100% of the indicated voltage on the LED, except for the 12 V LED which turns on between 50% and 100%
LCD Accuracy
AC voltage
±(3% rdg + 2 digits)
DC voltage
±(2% rdg + 2 digits)
Resistance
±(5% rdg + 3 digits)
LCD Resolution
0.1 V for voltages < 50 V, 1 V for voltages ≥ 50 V
0.01 kΩ for resistance measurement
GFCI Test Current
100 V - 150 V @ 6 mA - 9 mA AC, 150 V - 240 V < 12 mA
Standard Input Test Current
< 5 mA
Size (H x W x L)
1.3 x 2.15 x 7.6 in (3.3 x 5.46 x 19.3 cm )
Weight
9.9 oz (0.28 kg)
1. When used properly per Article 110.9 Use of Equipment (A) Test Instruments and Equipment.
Includes
- T+PRO Electrical Tester
- Fluke 1AC II VoltAlert Voltage Detector
- User manual
- Test lead wrap
- TP2 test probes
The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.