We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The T+PRO-1AC Kit combines two troubleshooting tools, in one convenient combo pack. The T+PRO Electrical Tester has all of the advantages of a traditional solenoid tester, with added functionality, but none of the typical drawbacks. With voltage measurement, continuity, built-in flashlight, GFCI trip capability, and the legendary ruggedness and reliability of Fluke, the tester is an excellent choice for most residential, commercial, and industrial applications. The 1AC-II is the pocket-sized voltage detector that can quickly test for energized circuits – a “must have for any electrician.
Operating principle
Senses the steady state electrostatic
field produced by ac voltage through insulation
without requiring contact to the bare conductor. A red glow at
the tip and a beeping noise (if not switched OFF) indicates the
presence of voltage.
Note: Does not respond to random electrostatic discharge.
Voltage sensing ranges
Nominally, 90 V AC to 1000 V
AC or 200 V AC to 1000 V AC
depending on model, 45 Hz to
405 Hz; also a 20 V to 90 V
control circuit model
Detector tip style
Blade or round, depending
on model
Light source
One high intensity red LED
Agency approvals/listings
c CSA us, CE, C-Tick
Safety rating
1000 V, CAT IV
IP rating
IP 40
Operating temperature range
-10 °C to 50 °C
Operating humidity ranges
0 % to 95 % (0 °C to 30 °C)
0 % to 75 % (30 °C to 40 °C)
0 % to 45 % (40 °C to 55 °C)
Operating altitude
3000 meters
Batteries
2 AAA alkaline batteries
included
Fluke T+/PRO Specifications
| Specifications | ||
| Temperature | Operating | -10°C to 55°C (14°F to 131°F) |
| Storage | -30°C to 60°C (-22°F to 140°F) | |
| Relative Humidity | 90% | 0°C to 30°C (32°F to 86°F) |
| 75% | 30°C to 40°C (86°F to 104°F) | |
| 45% | 40°C to 50°C (104°F to 122°F) | |
| Altitude | Operating | 2,000 m (approx. 6,561.6 ft) |
| Storage | 10,000 m (approx. 32,808.4 ft) | |
| Battery Type/Life | AAA (2); 40 hours | |
| Shock, Vibration | Sinusoidal vibration per MIL-PRF-28800F for a Class 2 instrument | |
| Safety | ISA-82.02.01 (IEC 61010-1 Mod) Second Edition, CAN/CSA-C22.2 No. 61010-1 Second Edition, IEC 61010 - 1 to 1000 V CAT III/600 V CAT IV Compliance to NFPA 70E1 | |
| AC Bandwidth | 45 Hz to 66 Hz | |
| Maximum Working Voltage | 1000 V AC/DC | |
| Maximum Measurable Voltage | 600 V AC/DC | |
| Duty Cycle | Indefinitely for voltages up to 240 V | |
| For voltages between 240 V and 600 V the duty cycle is 30 s on / 300 s off | ||
| For voltages above 240 V the tester must connect to a voltage source only for a MAXIMUM of 30 s and then disconnect for a MINIMUM of 300 s | ||
| Voltage Hazard LED | LEDs turn on at voltages > 30 V AC/DC ±35% | |
| LED Voltage Indication Levels | 12 V, 24 V, 48 V, 120 V, 208 V, 240 V, 277 V, 480 V, 600 V | |
| LEDs | LEDs turn on between 90% and 100% of the indicated voltage on the LED, except for the 12 V LED which turns on between 50% and 100% | |
| LCD Accuracy | AC voltage | ±(3% rdg + 2 digits) |
| DC voltage | ±(2% rdg + 2 digits) | |
| Resistance | ±(5% rdg + 3 digits) | |
| LCD Resolution | 0.1 V for voltages < 50 V, 1 V for voltages ≥ 50 V | |
| 0.01 kΩ for resistance measurement | ||
| GFCI Test Current | 100 V - 150 V @ 6 mA - 9 mA AC, 150 V - 240 V < 12 mA | |
| Standard Input Test Current | < 5 mA | |
| Size (H x W x L) | 1.3 x 2.15 x 7.6 in (3.3 x 5.46 x 19.3 cm ) | |
| Weight | 9.9 oz (0.28 kg) | |
| 1. When used properly per Article 110.9 Use of Equipment (A) Test Instruments and Equipment. | ||
Includes
- - T+PRO Electrical Tester
- - Fluke 1AC II VoltAlert Voltage Detector
- - User manual
- - Test lead wrap
- - TP2 test probes
Write Your Own Review
