The a3000 AC Wireless Current Clamp Module is part of the Fluke team of wireless troubleshooting tools. Connect the a3000 AC Wireless Current Clamp Module to your test point, and view the results up to 20 meters away on the 3000 Wireless Multimeter. You’ll save time, with less run-around collecting multiple measurements. Use multiple modules for measurements on three-phase systems. Or use as a stand-alone measurement tool or combine with other 3000 modules as a system for multiple measurements. From short distances, you can even view readings from modules through closed electrical panels. Plus no more writing down data as the a3000 current module captures up to 65,000 sets of time stamped min/max/avg readings, using the optional PC adapter. The wireless test tools also offer increased safety by letting you view readings in a separate location from the test point. Now you can take readings on moving machinery, with only the measurement module in harm’s way.
Specifications
Specifications
Range
0.5 A to 400.0 A
Resolution
0.1 A
Accuracy
400.0 A: 2% ± 5 digits (10 Hz to 100 Hz), 2.5% ± 5 digits (100 Hz to 500 Hz)
Inrush
Max displayed reading
999.9A
Crest factor (50 Hz/60 Hz)
3 at 500 A 2.5 at 600 A 1.42 at 1000 A Add 2 % for C.F. > 2
LCD w/backlight
3½ digits
Log rate/interval
1 sec minimum/adjustable by PC
Battery type
2 AA, NEDA 15 A, IEC LR6
Battery life
400 hours
Memory
Record up to 65,000 readings
RF communications
2.4 GHZ ISM Band
RF communication range
Open air, unobstructed
Up to 20 m
Obstructed, sheetrock wall
Up to 6.5 m
Obstructed, concrete wall or steel electrical enclosure
Up to 3.5 m
Operating temperature
-10°C to +50°C
Storage temperature
-40°C to +60°C
Temperature coefficient
Add 0.1 x (specified accuracy) / °C (< 18°C or > 28°C)
Operating humidity
90% at 35°C 75% at 40°C 45% at 50°C
Altitude
Operating
2,000 m
Storage
12,000 m
EMC
EN 61326-1:2006
Safety compliance
IEC 61010-1, 600 V CAT III, 3rd edition Pollution Degree 2
Safety rating
CAT III 600 V
Certifications
CSA, CE, FCC: T68-FBLE IC: 6627A-FBLE
Ingress Protection (IP) rating
IP30
Pollution Degree
2
Jaw opening
34 mm (1.33 in)
Size (HxWxD)
20.3 cm x 7.49 cm x 3.55 cm (8 in x 2.95 in x 1.4 in)
Weight
.22 kg (8 oz)
Warranty
Three years
Note: Not compatible with Fluke CNX test tools
Accessories Fluke a3000 FC AC Wireless Current Clamp Module
True-RMS AC Clamp Meter
Fluke a3000 FC Kit:
Fluke a3000 FC AC Current Clamp Kit
Fluke 3000 FC Wireless Multimeter
Fluke a3000 FC AC Wireless Current Clamp Module
TL175 Test Leads
AC175 Alligator Clips
Soft Carrying Case
The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.