We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The a3000 AC Wireless Current Clamp Module is part of the Fluke team of wireless troubleshooting tools. Connect the a3000 AC Wireless Current Clamp Module to your test point, and view the results up to 20 meters away on the 3000 Wireless Multimeter. You’ll save time, with less run-around collecting multiple measurements. Use multiple modules for measurements on three-phase systems. Or use as a stand-alone measurement tool or combine with other 3000 modules as a system for multiple measurements. From short distances, you can even view readings from modules through closed electrical panels. Plus no more writing down data as the a3000 current module captures up to 65,000 sets of time stamped min/max/avg readings, using the optional PC adapter. The wireless test tools also offer increased safety by letting you view readings in a separate location from the test point. Now you can take readings on moving machinery, with only the measurement module in harm’s way.
| Specifications | ||
| Range | 0.5 A to 400.0 A | |
| Resolution | 0.1 A | |
| Accuracy | 400.0 A: 2% ± 5 digits (10 Hz to 100 Hz), 2.5% ± 5 digits (100 Hz to 500 Hz) | |
| Inrush | Max displayed reading | 999.9A |
| Crest factor (50 Hz/60 Hz) | 3 at 500 A 2.5 at 600 A 1.42 at 1000 A Add 2 % for C.F. > 2 |
|
| LCD w/backlight | 3½ digits | |
| Log rate/interval | 1 sec minimum/adjustable by PC | |
| Battery type | 2 AA, NEDA 15 A, IEC LR6 | |
| Battery life | 400 hours | |
| Memory | Record up to 65,000 readings | |
| RF communications | 2.4 GHZ ISM Band | |
| RF communication range | Open air, unobstructed | Up to 20 m |
| Obstructed, sheetrock wall | Up to 6.5 m | |
| Obstructed, concrete wall or steel electrical enclosure | Up to 3.5 m | |
| Operating temperature | -10°C to +50°C | |
| Storage temperature | -40°C to +60°C | |
| Temperature coefficient | Add 0.1 x (specified accuracy) / °C (< 18°C or > 28°C) | |
| Operating humidity | 90% at 35°C 75% at 40°C 45% at 50°C |
|
| Altitude | Operating |
2,000 m |
| Storage | 12,000 m | |
| EMC | EN 61326-1:2006 | |
| Safety compliance | IEC 61010-1, 600 V CAT III, 3rd edition Pollution Degree 2 | |
| Safety rating | CAT III 600 V | |
| Certifications | CSA, CE, FCC: T68-FBLE IC: 6627A-FBLE | |
| Ingress Protection (IP) rating | IP30 | |
| Pollution Degree | 2 | |
| Jaw opening | 34 mm (1.33 in) | |
| Size (HxWxD) | 20.3 cm x 7.49 cm x 3.55 cm (8 in x 2.95 in x 1.4 in) | |
| Weight | .22 kg (8 oz) | |
| Warranty | Three years | |
| Note: Not compatible with Fluke CNX test tools | ||
Accessories
Fluke a3000 FC AC Wireless Current Clamp Module
- True-RMS AC Clamp Meter
Fluke a3000 FC Kit:
Fluke a3000 FC AC Current Clamp Kit
- Fluke 3000 FC Wireless Multimeter
- Fluke a3000 FC AC Wireless Current Clamp Module
- TL175 Test Leads
- AC175 Alligator Clips
- Soft Carrying Case
Write Your Own Review
