Wika Mensor’s CTI5000 Infrared Calibrator is equipped for temperatures up to 500 °C [932 °F]. Due to its stability, the new portable infrared calibrator is particularly essential to the calibration of infrared hand-held thermometers.
The black body has a vast diameter so that a large variety of infrared thermometers can be tested, no matter which lenses are fitted. The emissivity is fixed at 0.95 and the temperature can be controlled in steps of 0.1 °C. To check the black body, there is a bore located directly behind the surface so that the measurement can be made with contact and the quality monitored.
Specifications
Infrared calibrator
Indication
Application range
50 … 500 °C (122 ... 932 °F)
Stability
±0.1 K to 100 °C (212 °F) ±0.2 K to 350 °C (662 °F) ±0.4 K to 500 °C (932 °F)
Resolution
0.1 K
Temperature control
Heating time
30 min from Tamb. to 500 °C (Tamb. to 932 °F)
Cooling time
40 min from 500 °C to 100 °C (from 932 °F to 212 °F)
Stabilisation time
approx. 15 ... 20 min
Measuring surface
Emissivity
0.95
Diameter of the measuring surface
57 mm (2.24 in)
Bore for temperature probe
suitable for 3 mm (0.12 in) probes with an immersion depth of 68 mm (2.68 in)
Permissible ambient conditions
Relative humidity
35 ... 85 % r. h. (non-condensing)
Operating temperature
5 ... 35 °C (41 ... 95 °F)
Voltage supply
Power supply
AC 230 V, 50/60 Hz
Power consumption
275 VA
Case
Dimensions (W x D x H)
190 x 248 x 113 mm (7.5 x 9.8 x 4.5 in)
Weight
2.1 kg (4.6 lbs)
The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.