We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Wika Mensor’s CTI5000 Infrared Calibrator is equipped for temperatures up to 500 °C [932 °F]. Due to its stability, the new portable infrared calibrator is particularly essential to the calibration of infrared hand-held thermometers.
The black body has a vast diameter so that a large variety of infrared thermometers can be tested, no matter which lenses are fitted. The emissivity is fixed at 0.95 and the temperature can be controlled in steps of 0.1 °C. To check the black body, there is a bore located directly behind the surface so that the measurement can be made with contact and the quality monitored.
Infrared calibrator | |
Indication | |
Application range | 50 … 500 °C (122 ... 932 °F) |
Stability | ±0.1 K to 100 °C (212 °F) ±0.2 K to 350 °C (662 °F) ±0.4 K to 500 °C (932 °F) |
Resolution | 0.1 K |
Temperature control | |
Heating time | 30 min from Tamb. to 500 °C (Tamb. to 932 °F) |
Cooling time | 40 min from 500 °C to 100 °C (from 932 °F to 212 °F) |
Stabilisation time | approx. 15 ... 20 min |
Measuring surface | |
Emissivity | 0.95 |
Diameter of the measuring surface | 57 mm (2.24 in) |
Bore for temperature probe | suitable for 3 mm (0.12 in) probes with an immersion depth of 68 mm (2.68 in) |
Permissible ambient conditions | |
Relative humidity | 35 ... 85 % r. h. (non-condensing) |
Operating temperature | 5 ... 35 °C (41 ... 95 °F) |
Voltage supply | |
Power supply | AC 230 V, 50/60 Hz |
Power consumption | 275 VA |
Case | |
Dimensions (W x D x H) | 190 x 248 x 113 mm (7.5 x 9.8 x 4.5 in) |
Weight | 2.1 kg (4.6 lbs) |
Write Your Own Review
- Testing and calibration of non-contact temperature measuring instruments
- Heating source for works laboratories for the calibration of infrared thermometers
- Also suitable for on-site calibration