The Texmate UM-35-DCV is a cost-effective utility meter for general purpose single or differential DC voltage measurement. This meter comes standard with a red 3 1/2 digit LED display or you can choose an optional green or super bright LED display.
Specifications
Input Configuration:
Single-ended, however the isolated power supply enables differential measurements up to a maximum common mode of 50V.*
Full Scale Ranges:
Three header selectable ranges of ±2V, ±20V and ±200V DC
Input Impedance:
1MΩ minimum
A/D Converter:
12 Bit Dual Slope
Accuracy:
±(0.05% of reading plus 2 counts)
Temperature Coefficient:
100ppm/°C (Typical)
Warm Up Time:
2 minutes to specified accuracy
Conversion Rate:
3 conversions per second (Typical)
Display:
3 1/2 digit 0.56" Red LED display (std), Green or Super Bright Red are optional. Range -1999 to 1999 counts.
Decimal Selection:
Header under face plate, X•X•X•X•
Overrange Indication:
1 (MSD) displayed with all other digits blank
Power Supply (PS6 std):
120/240V AC, 50/60/400 Hz. approx 1.5W
(PS7 opt)
Isolated Switcher. 9 to 36V DC/12 to 24V AC
(PS8 opt)
5 VDC/200mA
Operating Temperature:
–10 to 50 °C
Storage Temperature:
–20 to 70 °C
Relative Humidity:
95% (non-condensing)
Case Dimensions:
Bezel 3.78”Wx1.89”H (96mm x 48mm) Depth behind bezel 3.36" (83.5mm) Plus 0.5 to .9” (12.7 to 22.8mm) depending on connector used.
Weight:
NW. 12oz (0.34kg) 15.6oz (0.44kg). when packed.
The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.