We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The Texmate UM-35-DCV is a cost-effective utility meter for general purpose single or differential DC voltage measurement. This meter comes standard with a red 3 1/2 digit LED display or you can choose an optional green or super bright LED display.
Input Configuration: | Single-ended, however the isolated power supply enables differential measurements up to a maximum common mode of 50V.* |
Full Scale Ranges: | Three header selectable ranges of ±2V, ±20V and ±200V DC |
Input Impedance: | 1MΩ minimum |
A/D Converter: | 12 Bit Dual Slope |
Accuracy: | ±(0.05% of reading plus 2 counts) |
Temperature Coefficient: | 100ppm/°C (Typical) |
Warm Up Time: | 2 minutes to specified accuracy |
Conversion Rate: | 3 conversions per second (Typical) |
Display: | 3 1/2 digit 0.56" Red LED display (std), Green or Super Bright Red are optional. Range -1999 to 1999 counts. |
Decimal Selection: | Header under face plate, X•X•X•X• |
Overrange Indication: | 1 (MSD) displayed with all other digits blank |
Power Supply (PS6 std): | 120/240V AC, 50/60/400 Hz. approx 1.5W |
(PS7 opt) | Isolated Switcher. 9 to 36V DC/12 to 24V AC |
(PS8 opt) | 5 VDC/200mA |
Operating Temperature: | –10 to 50 °C |
Storage Temperature: | –20 to 70 °C |
Relative Humidity: | 95% (non-condensing) |
Case Dimensions: | Bezel 3.78”Wx1.89”H (96mm x 48mm) Depth behind bezel 3.36" (83.5mm) Plus 0.5 to .9” (12.7 to 22.8mm) depending on connector used. |
Weight: | NW. 12oz (0.34kg) 15.6oz (0.44kg). when packed. |
Manuals
Write Your Own Review