AEMC’s MH60 portable 100Arms current probe with an insulated BNC output cable precisely measures AC or DC current waveforms. It is equipped with proportional mV output for direct readings on oscilloscopes from DC to 1MHz at 3dB. Users can power the probe by either a rechargeable NIMH battery or from a 5 V USB power adapter.
Specifications
Maximum Conductor Size
1.02" (26mm)
Current Range
100AAC/DC
Measurement Range
0.5A to 100AAC/DC
Output
10mV/A
Lead Length
6.5ft (1.9m)
Output Termination
BNC connector
Accuracy (Typical)
0.5 to 64A: ±1.15% ±0.1mV 64 to 90A: ±4% 90 to 100Arms: ±5%
Phase Shift at 50Hz
±1°
Bandwidth with Filter
1MHz @ -3dB, 30kHz @ -3dB, 3kHz @ -3dB
Frequency Limitation
100Arms at 45kHz continuously
Power Source
1.2V NIMH AAA rechargeable or 5Vdc power adaptor by female type B micro USB
Battery Life
7 to 8 hours continuous use
Compatibility
Any oscilloscopes with BNC input
Dimensions (H x W x D)
5.43 x 1.93 x 1.1” (138 x 49 x 28mm)
Weight
7.04 oz (200g)
Operating Temperature
14° to +122°F (-10° to +55°C); 10 to 85% RH
Storage Temperature with Battery
-4° to +122°F (-20° to +50°C); 10 to 85% RH
Pollution Degree
2
Protection
IK 04, IP40 (jaws closed), IP30 (jaws open)
EMC
EN 61326-1
Safety Compliance
EN 61010-2-032, 300V CAT III CE
The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.