Offering all the features and functions of their CPF line of quick-test pressure fittings, Crystal Engineering has introduced their MPF-5/16TRM CPF Pressure Fitting that is for Foxboro, Rosemount, & Yokogawa transmitters.
See the other range of CPF Fittings and Hoses from Crystal Engineering below.
(A) 0.63" (16 mm)
(B) 2.13" (54 mm)
Specifications
PERFORMANCE
Maximum Allowable Working Pressure (MAWP):
10 000 psi / 700 bar / 70 MPa
Most fittings thoughout this document meet the MAWP specificaton of 10000 psi / 700 bar / 70 MPa. Exceptions are labeled with an icon ( 5 or 15 ) and a key to indicate the pressure rating. Non-Crystal MP adapters require wrench tightening.
Finger-tight:
-20 to 50°C
Wrench-tight:
-40 to 150°C
Minimum Hose Bend Radius:
1.0" (25mm)
CONSTRUCTION
Thread Type:
7/16-20 UNF 2B
Cone Angle:
60°, nominal
Fittings:
High Strength 316 Stainless Steel
Hose is not compatible with dioctyl sebacate fluid.
Hose:
Polyamide core with urethane jacket
External Hose Diameter:
0.235" (6 mm)
Internal Hose Diameter:
0.08" (2 mm)
Hose Weight:
0.0179 lbs/ft (26.6 g/m)
CAUTION: To achieve CPF maximum allowable working pressures no o-ring substitutions are allowed.
CPF Female O-rings:
AS568A-012, Viton® 80 or 90 #3981
O-ring Lubricant:
Molykote® 55
RECOMMENDATIONS
Thread Lubricant:
Use a process compatible fluid
Wrench Torque:
100–140 in-lbs (11.3–15.8 Nm)
If a torque wrench isn’t practical to use, hand tighten then tighten an additional 20 degrees using a wrench.
The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.