We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Offering all the features and functions of their CPF line of quick-test pressure fittings, Crystal Engineering has introduced their MPF-5/16TRM CPF Pressure Fitting that is for Foxboro, Rosemount, & Yokogawa transmitters.
See the other range of CPF Fittings and Hoses from Crystal Engineering below.
(A) 0.63" (16 mm)
(B) 2.13" (54 mm)
| PERFORMANCE | ||
| Maximum Allowable Working Pressure (MAWP): | 10 000 psi / 700 bar / 70 MPa | Most fittings thoughout this document meet the MAWP specificaton of 10000 psi / 700 bar / 70 MPa. Exceptions are labeled with an icon ( 5 or 15 ) and a key to indicate the pressure rating. Non-Crystal MP adapters require wrench tightening. |
| Finger-tight: | -20 to 50°C | |
| Wrench-tight: | -40 to 150°C | |
| Minimum Hose Bend Radius: | 1.0" (25mm) | |
| CONSTRUCTION | ||
| Thread Type: | 7/16-20 UNF 2B | |
| Cone Angle: | 60°, nominal | |
| Fittings: | High Strength 316 Stainless Steel | Hose is not compatible with dioctyl sebacate fluid. |
| Hose: | Polyamide core with urethane jacket | |
| External Hose Diameter: | 0.235" (6 mm) | |
| Internal Hose Diameter: | 0.08" (2 mm) | |
| Hose Weight: | 0.0179 lbs/ft (26.6 g/m) | CAUTION: To achieve CPF maximum allowable working pressures no o-ring substitutions are allowed. |
| CPF Female O-rings: | AS568A-012, Viton® 80 or 90 #3981 | |
| O-ring Lubricant: | Molykote® 55 | |
| RECOMMENDATIONS | ||
| Thread Lubricant: | Use a process compatible fluid | |
| Wrench Torque: | 100–140 in-lbs (11.3–15.8 Nm) | If a torque wrench isn’t practical to use, hand tighten then tighten an additional 20 degrees using a wrench. |
Write Your Own Review
