The High Frequency MiniFlex Probe is a compact flexible AC current measurement device composed of a flexible sensor and an electronic module. It is designed to measure AC Current from 5Hz to 1MHz. The flexible sensor permits measurements on conductors where standard clamp-on probes could not be used. In particular, it can be installed in confined spaces, places where access is difficult, or even wrapped around irregular shapes. The flexible sensor is available in lengths of 6" and 10".
Specifications
MODELS
MF300-6-2-10-HF
MF300-10-2-10-HF
ELECTRICAL
Range
30/300A
Signal Output
100mV/10mV/A
Frequency Range
5 to 1MHz @ -3db
Influence of Conductor
Positioning
1.5% typical, 3% max
Influence of Conductor
Positioning in Sensor
Against Handle
4% typical, 6% max
External ConductorInfluence
35dB to 40dB on contact
Power Source
9V Alkaline battery (6LF22)
MECHANICAL
SensorDiameter
5mm Ø
Sensor Length
6" (152mm)
10" (250mm)
Max ConductorSize
1.77" (45mm)
2.95" (70mm)
Connection Cable Length
6.5 ft (2m)
DropTest
Per IEC 68-2-32
Vibration
Per IEC 68-2-6
Mechanical Shock
Per IEC 68-2-27
Weatherproofing
IP 50
ENVIRONMENTAL
Operating Temperature Range
14° to 131°F (-10° to +55°C)
Storage Temperature Range
-40° to 158°F (-40° to +70°C)
Altitude
Operating: 0 to 2000m, working voltage derating above;
Non-operating: 0 to 12,000m
SAFETY
Safety Rating
EN 61010, 1000V CAT III; 600V CAT IV
The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.