We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The High Frequency MiniFlex Probe is a compact flexible AC current measurement device composed of a flexible sensor and an electronic module. It is designed to measure AC Current from 5Hz to 1MHz. The flexible sensor permits measurements on conductors where standard clamp-on probes could not be used. In particular, it can be installed in confined spaces, places where access is difficult, or even wrapped around irregular shapes. The flexible sensor is available in lengths of 6" and 10".
MODELS | MF 300-6-2-10-HF | MF 300-10-2-10-HF |
ELECTRICAL | ||
Range | 30/300A | |
Signal Output | 100mV/10mV/A | |
Frequency Range | 5 to 1MHz @ -3db | |
Influence of Conductor Positioning |
1.5% typical, 3% max | |
Influence of Conductor Positioning in Sensor Against Handle |
4% typical, 6% max | |
External Conductor Influence | 35dB to 40dB on contact | |
Power Source | 9V Alkaline battery (6LF22) | |
MECHANICAL | ||
Sensor Diameter | 5mm Ø | |
Sensor Length | 6" (152mm) | 10" (250mm) |
Max Conductor Size | 1.77" (45mm) | 2.95" (70mm) |
Connection Cable Length | 6.5 ft (2m) | |
Drop Test | Per IEC 68-2-32 | |
Vibration | Per IEC 68-2-6 | |
Mechanical Shock | Per IEC 68-2-27 | |
Weatherproofing | IP 50 | |
ENVIRONMENTAL | ||
Operating Temperature Range | 14° to 131°F (-10° to +55°C) | |
Storage Temperature Range | -40° to 158°F (-40° to +70°C) | |
Altitude | Operating: 0 to 2000m, working voltage derating above; Non-operating: 0 to 12,000m | |
SAFETY | ||
Safety Rating | EN 61010, 1000V CAT III; 600V CAT IV | |
Write Your Own Review