The Ametek ASC-400 can measure and source RTDs, thermcouples, Current, Voltage, Frequency, and Resistance with Pulse train output. Combine it with APM CPF pressure module series or a dry block calibrator to document pressure and temperature tests.
Optimal read out visibility and high accuracy Large color display and very user friendly interface. The ASC-400 accuracy is designed to meet high demands of today's modern sensors and transmitters |
|
Source and Measure RTD: 16 different types, Thermocouple: 13 different types, Current 0-24 mA DC, Voltage 0-20 VDC, Frequency 0.05 to 10,000 Hz with Pulse train out-put, Resistance 5 to 4000 Ohms |
|
Simultaneous read-back and fast RTD simulation Includes isolated measurement loop from device-under-test of mA, V, and pressure. The RTD simulation feature works with pulsed transmitters and PLC´s circuits |
|
Calibrate temperature and pressure Add an Ametek APM pressure module and expand the ASC-400 to a full featured pressure calibrator, THis adds an automatic leak-test, pressure-switch calibration and more… Use the ASC-400 along with Ametek-JOFRA temperature dry blocks and add measurement channels for sensors or temperature switches |
|
Measure temperature ASC-400 can be used as high accuracy thermometer by addding a high accuracy PRT and progamming the ASC-400 with CvD coefficients to obtain true temperature, based on “true ohm” technology! |
Optional BARO Barometric Pressure Module
The BARO option turns any gauge measuring APM into an absolute barometric pressure measuring device.
Accuracy: ± 0.5 mbarA / 0.00725 psiA Range: 700 to 1100 mbarA / 10.153 to 15.954 psiA
Includes effects of linearity, hysteresis, tempco (-10 to 50°C /14 to 122°F) and stability for 1 year.
The BARO option is must be factory installed.