We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
PG10 and PG20:
90-250VAC, 47-63Hz, 52VA, 26W maximum
11-36VDC, 26VA, 26W maximum
PG30:
90-250VAC, 47-63Hz, 110VA, 62W maximum
11-36VDC, 62VA, 62W maximum
Display:
PG10: LCD, 480 x 272 pixel resolution, 65K color
PG20: LCD, 640 x 480 pixel resolution, 65K color
PG30: LCD, 1024 x 768 pixel resolution, 65K color
Memory:
256MB storage memory on board.
Analog Input Cards (AI20X):
Channels: AI203 ~ 3 channels, AI206 ~ 6 channels
Resolution: 24 bits
Sampling Rate: 10 times/ second
Maximum Rating: RTD input ±20V
T/C and Voltage input ± 65V
mA input ±10V
Temperature Effect: ±0.1uV ±15PPM of reading for all inputs except mA, ±30PPM of reading for mA input
Sensor Lead Resistance Effect:
T/C: 0.32PPM of reading/ohm
3-wire RTD: 2.6 ˚C /ohm of resistance difference of two leads (Based on ℃ measurement temperature for PT100)
2-wire RTD: 2.6 ˚C /ohm of resistance sum of two leads (Based on ℃ measurement temperature for PT100)
Burn-out Current: 10uA
Common Mode Rejection Ratio (CMRR): 120dB
Isolation Breakdown Voltage between channels: 1500VAC min.
Sensor Break Detection:
Sensor opened for TC, RTD and mV inputs, below 1 mA for 4-20mA input, below 0.25V for 1-5V inputs, unavailable for other inputs
Sensor Break Responding Time: Within 1 seconds for TC, RTD and mV inputs, 0.1 second for 4-20 mA and 1-5V inputs
Type | Range | Accuracy at | Input |
J | -120 ~ 1000 ËšC | ±1 ËšC | 3.12MΩ |
K | -200 ~ 1370 ËšC | ±1 ËšC | 3.12MΩ |
T | -250 ~ 400ËšC | ±1 ËšC | 3.12MΩ |
E | -100 ~ 900 ËšC | ±1 ËšC | 3.12MΩ |
B | 0 ~ 1820 ËšC | ±2ËšC | 3.12MΩ |
R | 0 ~ 1768 ËšC | ±2 ËšC | 3.12MΩ |
S | 0 ~ 1768 ËšC | ±2 ËšC | 3.12MΩ |
N | -250 ~ 1300 ËšC | ±1 ËšC | 3.12MΩ |
L | -200 ~ 900 ËšC | ±1 ËšC | 3.12MΩ |
U | -200 ~ 600ËšC | ±1 ËšC | 3.12MΩ |
P | 0 ~ 1395 ËšC | ±1 ËšC | 3.12MΩ |
W5 | 0 ~ 2315 ËšC | ±1 ËšC | 3.12MΩ |
W3 | 0 ~ 2315ËšC | ±1 ËšC | 3.12MΩ |
LR | -200 ~ 800 ËšC | ±1 ËšC | 3.12MΩ |
A1 | 0 ~ 2500 ËšC | ±1 ËšC | 3.12MΩ |
A2 | 0 ~ 1800 ËšC | ±1 ËšC | 3.12MΩ |
A3 | 0 ~ 1800 ËšC | ±1 ËšC | 3.12MΩ |
M | -200 ~ 100 ËšC | ±1 ËšC | 3.12MΩ |
PT50 | -200 ~ 850 ËšC | ±0.4 ËšC | 2.0KΩ |
PT100 | -200 ~ 850 ËšC | ±0.4 ËšC | 2.0KΩ |
PT200 | -200 ~ 850 ËšC | ±0.4 ËšC | 2.0KΩ |
PT500 | -200 ~ 850 ËšC | ±0.4 ËšC | 2.0KΩ |
PT1000 | -200 ~ 350 ËšC | ±0.4 ËšC | 2.0KΩ |
PT50 | -200 ~ 850 ËšC | ±0.4 ËšC | 2.0KΩ |
PT100 | -200 ~ 850 ËšC | ±0.4 ËšC | 2.0KΩ |
JPT50 | -200 ~ 600 ËšC | ±0.4 ËšC | 2.0KΩ |
JPT100 | -200 ~ 600 ËšC | ±0.4 ËšC | 2.0KΩ |
JPT200 | -200 ~ 600 ËšC | ±0.4 ËšC | 2.0KΩ |
JPT500 | -200 ~ 600 ËšC | ±0.4 ËšC | 2.0KΩ |
JPT1000 | -200 ~350 ËšC | ±0.4 ËšC | 2.0KΩ |
Cu50 | -50 ~ 200 ËšC | ±0.4 ËšC | 2.0KΩ |
Cu100 | -50 ~ 200 ËšC | ±0.4 ËšC | 2.0KΩ |
Cu50 | -180 ~ 200 ËšC | ±0.4 ËšC | 2.0KΩ |
Cu100 | -180 ~ 200 ËšC | ±0.4 ËšC | 2.0KΩ |
Ni100 | -60 ~ 180 ËšC | ±0.4 ËšC | 2.0KΩ |
Ni200 | -60 ~ 180 ËšC | ±0.4 ËšC | 2.0KΩ |
Ni500 | -60 ~ 180 ËšC | ±0.4 ËšC | 2.0KΩ |
Ni1000 | -60 ~ 180 ËšC | ±0.4 ËšC | 2.0KΩ |
Cu10 | -200 ~ 260 ËšC | ±0.1 ËšC | 2.0KΩ |
±20mA | -26 ~ 26mA | ±0.05% | 75Ω |
±60mV | -122 ~ 122mV | ±0.05% | 3.12MΩ |
±200mV | -243 ~ 243mV | ±0.05% | 3.12MΩ |
±1V | -1.58 ~ 1.58mV | ±0.05% | 3.12MΩ |
±2V | -3.16 ~ 3.16mV | ±0.05% | 3.12MΩ |
±6V | -6.32 ~ 6.32V | ±0.05% | 3.12MΩ |
±20V | -25.3 ~ 25.3V | ±0.05% | 3.12MΩ |
±50V | -50.6 ~ 50.6V | ±0.05% | 3.12MΩ |
0.4 ~ 2V | -3.16 ~ 3.16V | ±0.05% | 3.12MΩ |
1 ~ 5V | -6.32 ~ 6.32V | ±0.05% | 3.12MΩ |
Digital Input Card (DI206):
Channels: 6 per card
Logic Low: -5V minimum, 0.8V maximum
Logic High: 3.5V minimum, 24V maximum
External pull-down Resistance: 1KΩ maximum
External pull-up Resistance: 1.5MΩ minimum
Relay Output Card (RO206):
Channels: 6 per card
Contact Form: N.O. & N.C. (form C)
Relay Rating: 5A/240 VAC, life cycles 200,000 for resistive load
Analog Output Card (AO206):
Channels: 6 per card
Output signal: 4-20mA, 0-20mA, 0-5V, 1-5V, 0-10V
Resolution: 16 bits
Accuracy: ±0.05% of Span ±0.0025% /ËšC
Load Resistance: 0-500 ohms (current), 10K ohms minimum (voltage)
Output Regulation: 0.01% for full load change
Output Setting Time: 0.1 second (stable to 99.9%)
Isolation Breakdown Voltage: 1500VAC at 50/60Hz for 1 minute
Integral Linearity Error: ±0.005% of Span
Temperature Effect: ±0.0025% of Span /ËšC
COMM Module (IF232 and IF485):
Interface: RS-232 (1 unit), RS-485 or RS-422 (up to 247 units)
Protocol: Modbus Protocol RTU mode
Address: 1-247
Baud Rate: 9.6 ~ 115.2 Kbits/sec.
Measured data Bits: 7 or 8 bits
Parity Bit: None, Even or Odd
Stop Bit: 1 or 2 bits
Standard Ethernet Communication:
Protocol: Modbus TCP/IP, 10/100 Base T
Ports: AUI (Attachment Unit Interface) and RJ-45, Auto- detect capability
Real time clock accuracy vs. temperature inside of housing
Temperature inside housing | typical error per month |
10 ~ 40 ËšC 0 ËšC or 50 ËšC -10ËšC or 60 ËšC | 18 seconds 52 seconds 107 seconds |
Environmental & Physical:
Operating Temperature: 0 ~ 50 ËšC
Storage Temperature: -30 ~ 70 ËšC
Humidity: 20 to 90% RH (non-condensing), maximum relative humidity 90% is for ambient temperature up to 38ËšC decreasing linearly to 50% relative humidity at 50ËšC
Altitude: 2000 M maximum
Insulation Resistance: 20 M ohms min. (at 500 VDC)
Dielectric Strength: 2300VAC, 50/60 Hz for 1 minute between power terminal and earth
Vibration Resistance: 10-55 Hz, 10m/ s² for 2 hours
Shock Resistance: 30m/ s² (3g) for operation, 20g for transportation
Operation Position: no inclined restriction
Dimensions: Panel Mount style: 144(W) x 144(H) x 193mm (D) (for PG10/PG20)
288(W) x 288(H) x 194mm (D) (for PG30)
Standard Panel Cutout: 137 x 137mm (for PG10/PG20)
281 x 281mm (for PG30)
Approval Standards:
Safety: UL61010C-1, CSA C22.2 No. 24-93
CE: EN61010-1 (IEC1010-1) over voltage category II, Pollution degree 2
Protective Class: IP 65 front panel for indoor use,
IP 20 housing and terminals
EMC:
Emission: EN61326-1 (EN55022 class A, EN61000-3-2, EN61000-3-3)
Immunity: EN61326-1 (EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11)