The Wika Mensor CPP700-H enables simple and accurate pressure generation of up to a max. of 10,000 psig (700 bar).
|Model CPP700-H||Model CPP1000-H|
|Pressure range||0 ... 700 bar
(0 … 10,000 psi)
|0 … 1,000 bar
(0 … 14,500 psi)
|Pressure transmission medium||Hydraulic fluid based on mineral oil or single distilled water 1)
(Water-based hydraulic fluids are not suitable)
|Fluid reservoir||200 cm³|
|For reference measuring instrument||G ½ female thread, freely rotating.
The connection can be disconnected using an Allen key. Then a G ⅜ female thread is available.
|For test item||G ¼ female at test connection hose, length 1 m (3.28 ft), Minimess® 1620 system||G ¼ female, freely rotating at test connection hose, length 1 m (3.28 ft)|
|Fine adjustment||Fine adjustment valve / volume adjustment|
|Material||anodised aluminium, brass, stainless steel, ABS|
|Sealings||FKM and NBR (standard)|
|Dimensions (L x W x H)||280 x 170 x 120 mm
(11.0 x 6.7 x 4.7 in)
1) Other pressure transmission media on request.
Data Sheet Resources
Write Your Own Review
- Simple test pressure generation on-site, in the laboratory or in the workshop
- For the testing, adjustment and calibration of all types of pressure measuring instruments
- Hydraulic pressure generation up to 700 bar (10,000 psi)
No accessories available