We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Wika Mensor’s CPP1000-L Hydraulic Hand Spindle Pump is designed with a 14,500 psi pressure range and 55 cm³ reservoir. The pump is essential in applications involving the testing, adjustment and calibration of mechanical and electronic pressure measuring instruments through comparative measurements. By connecting the test item and a sufficiently accurate reference measuring instrument to the test pump, on actuating the pump, the same pressure will act on both instruments. Through comparison of the two measured values at any given pressure value, a check of the accuracy and/or adjustment of the pressure measuring instrument under test can be executed.
CPP1000-M | CPP1000-L | |
Pressure range | 0 ... 1,000 bar (0 ... 14,500 psi) | |
Pressure transmission medium | Hydraulic fluid based on mineral oil or single distilled water 1) (water-based hydraulic fluids are not suitable) | |
Reservoir | 110 cm³ | 55 cm³ |
Pressure connections | ||
Test connection | 2 x G ½ female thread, freely rotating, with O-ring | |
Distance between test connections | 200 mm (7.9 in) | 115 mm (4.5 in) |
Piston of spindle pump | ||
Piston diameter | 8 mm (0.3 in) | |
Swept volume per revolution | approx. 0.1 cm³ | |
Overall swept volume | approx. 3.9 cm³ | |
Fine pressure adjustment | optional, see accessories in the Data Sheet | Fine adjustment valve on the side |
Required force at | ||
250 bar (3,600 psi) | 2.0 Nm | |
500 bar (7,200 psi) | 4.0 Nm | |
1,000 bar (14,500 psi) | 8.0 Nm | |
Material | ||
Cylinder | Brass | |
Piston | Stainless steel | |
Rear flange | Aluminium | |
Sealings | FKM, NBR (standard), optional EPDM 2) | |
Stationary mounting | 2 x Ø 6.4 mm (0.25 in) through-bores in the front flange | |
Instrument base | ||
Dimensions (L x W x H) | 420 x 280 x 103 mm (16.5 x 11.0 x 4.1 in) | 420 x 240 x 103 mm (16.5 x 9.5 x 4.1 in) |
Weight | 6.3 kg (13.89 lbs.) | 5.6 kg (12.35 lbs.) |
1) Other pressure transmission media on request.
2) Using the EPDM variant (for aggressive media), Skydrol or brake fluid is permissible as pressure transmission medium.
Write Your Own Review
- Simple test pressure generation on site, in the laboratory or in the workshop
- For the testing, adjustment and calibration of all types of pressure measuring instruments
- Hydraulic pressure generation up to 1,000 bar (14,500 psi)