We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
UEI’s DL200 CATIII Clamp Meter and Voltage Tester has a sliding jaw clamp that incorporates the convenience of a fork meter with the precision of a closed current clamp meter. The patent pending low profile sliding clamp jaw effortlessly opens to fit in small spaces and when closed it provides greater accuracy than open fork measurements. The DL200 is perfect for quick checks or validating installations with the essential features of AC and DC voltage, AC amps, resistance, continuity and data hold and safety rated to CATIII. Ergonomically designed, the DL200 has connected test leads and built-in test lead storage.
AC Volts
Range | Resolution | Accuracy | Overload Protection |
1V to 199.9V | 0.1V | ±(1.5% + 5 dgts) | 600V |
200V to 600V | 1V |
DC Volts
Range | Resolution | Accuracy | Overload Protection |
1V to 20V | 0.01V | ±(1.5% + 3 dgts) | 600V |
21V to 200V | 0.1V | ||
201V to 600V | 1V |
Minimum measurement AC mV:500mV /DC mV:40mV
Response time (input; AC 100V): 1 sec
Max displayed value: 660V AC/DC
High warning symbol input voltage > AC30V/ > DC30V
Meter beeps input voltage > AC 601V/ > 601V DC
Input impedance: 10MΩ
TRMS frequency range:
Sine wave: 45Hz to 400Hz
Overload protection: 600V AC RMS or 600V DC
AC Amps
Range | Resolution | Accuracy | Overload Protection |
1A to 200A | 0.1A | ±(2.0% + 5 dgts) | 600V |
Frequency range: sine wave: 45Hz to 400Hz
Maximum displayed value: AC 220A
Minimum displayed value: AC 500mA
Resistance
Range | Resolution | Accuracy | Overload Protection |
200Ω to 2000Ω | 0.1Ω to 1Ω | ±(0.8% + 4 dgts) | 600V |
Max displayed value: 2200Ω
Overload protection: 600V AC RMS or 600V DC
Continuity
Audible threshold | Response time | Output voltage | Overload Protection |
Approx : < 40Ω | 50ms | 0.987V | 600V |
Write Your Own Review
- Current measurement on live conductors
- Measure circuit loading
- Test circuit breakers