We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Techne UCAL 400+ Dry Block Temperature Calibrator heats up to 430 Deg C. Techne's UCAL400+ calibrator heater provides a safe, dry, constant temperature source. It is fast and economical and can be used either on a bench top or as a portable field unit. The weight of the unit is only nine pounds/four kilograms. The unit covers the temperature range from 5 C above ambient up to 430 C using a machined aluminum insert block as the heat transfer medium. The temperature control circuit is built into the unit. Even though the unit heats up rapidly, highly efficient insulation ensures that the case remains cool enough to handle even at maximum operating temperatures. Techne's calibrator has been designed to comply with all relevant Radio Frequency interference and electrical safety regulations. The UCAL400+ includes one multi-well insert (1/8", 3/16", 1/4", 5/16" & 3/8" well sizes), power cable, insert extractor, NIST traceable calibration certificate and instruction manual.
Temperature range | 5°C (9°F) above ambient to 430°C (806°F) |
Cooling rate 400°C to 100°C | 21 minutes |
Heating rate 20°C to 400°C | 12 minutes |
Over-temperature cut-out | Approximately 450°C |
Accuracy at 200°C | ±0.03°C |
Accuracy at 400°C | ±0.05°C |
Uniformity at 200°C | 0.015°C |
Uniformity at 400°C | 0.025°C |
Display resolution | 0.1°C |
Fan cooling | Automatic |
Weight | 4 kg (9 lbs) |
lnsert immersion depth | 114 mm (4.5 inches) |
Write Your Own Review