Sonel MIC-10s1 10kV Class Insulation Tester

Generating PDF - Please be Patient

Part Number: MIC-10s1

Manufacturer: Sonel

Configuration:

MIC-10s1-

Key Features:

  • Insulation resistance to 40.0 TΩ
  • User-selectable test voltage any from 50 V to 1,000 V (with 10 V resolution) and 1,000 V to 10,000 V (with 25 V resolution)
  • Continuous indication of measured insulation resistance or leakage current
  • Audio beeps every five-second periods to indicate measurement progress
  • Indication of actual test voltage during measurement
  • 1.2 mA, 3 mA and 5 mA test current
  • Step voltage and ramp voltage insulation resistance measurements (SV) (RV)
  • Selectable test times (T1, T2 , T3 from 1 to 600 seconds) to measure one or two absorption coefficients
  • Adjustable measuring time to 99' 59'’
  • Polarization index (PI) and dielectric absorption ratio (DAR) measurements
  • Dielectric Discharge calculation (DD)
  • Digital filters function for measurements in high-noise environment (10 s, 30 s , 60 s)
  • High-noise immunity, up to 1550 V (induced)
  • Adjustable limit settings for measured resistance RISO
  • Measurement of capacitance during the measurement of RISO
  • DC and AC voltage measurement in the range of 0 V to 600 V
  • Graphical display of R and V, or R and I, plots the progress of test in real-time, and final graph
  • Meter conforms to EN 61557

Safety First:

  • CAT-IV 600V, CAT-III 1000V
  • Automatic discharge of tested object after measurement completes to remove high voltage charges remaining on cable
  • Protection against measuring live objects, measurement will not proceed
  • Measurements with test leads up to 180 ft / 55 m length

Construction:

  • Backlit keyboard and graphical display
  • Rugged IP 54 case - protected from water spray from any direction

Power Supply:

  • Bult-in battery pack, low battery warning indicator, built-in fast charger
  • AC power: 90 V to 260 V, 50 Hz / 60 Hz

Memory:

  • 990 cells of memory (11,880 records) to save test results
  • Wireless data transmission to a PC with Bluetooth®, or via USB cable

Availability: In stock

Product Options:
Sonel MIC-10s1 Calibration Options
Our Price: $5,150.00

Product Detail

Details

The Sonel MIC-10s1 10kV Insulation Tester is portable, rugged, and easy-to-use. It has a wide measurement range, selectable test voltages, and excellent safety features.

Specifications

Details

Insultaion Resistance Measurement

Measurement range acc. to IEC 61557-2: VN = 10,000V: 10.00MΩ to 40.0TΩ

Measurement with DC and increasing voltage (SV) for UISO = 10 kV

Range Resolution Accuracy
0.0 to 999 kΩ 1 kΩ ±(3% m.v. + 10 digits)
1.00 to 9.99 MΩ 0.01 MΩ
10.0 to 99.9 MΩ 0.1 MΩ
100 to 999 MΩ 1 MΩ
1.00 to 9.99 GΩ 0.01 GΩ
10.0 to 99.9 GΩ 0.1 GΩ
100 to 999 GΩ 1 GΩ ±(3.5% m.v. + 10 digits)
1.00 to 9.99 TΩ 0.01 TΩ ±(7.5% m.v. + 10 digits)
10.0 to 20.0 TΩ 0.1 TΩ ±(12.5% m.v. + 10 digits)
 10.0 to 40.0 TΩ

Approximate maximum values of the measured resistance, depending on the test voltage

Voltage VISO Measurement range Measurement range with AutoISO-5000
50 V 200 GΩ 20.0 GΩ
100 V 400 GΩ 40.0 GΩ
250 V 1.00 TΩ 100 GΩ
500 V 2.00 TΩ 200 GΩ
1,000 V 4.00 TΩ 400 GΩ
2,500 V 10.00 TΩ 400 GΩ
5,000 V 20.0 TΩ 400 GΩ
10,000 V  40.0 TΩ


AC/DC voltage measurement

Range Resolution Accuracy
0.0 to 29,9 V 0.1 V ±(2% m.v. + 20 digits)
30.0 to  299.9 V 0.1 V ±(2% m.v. + 6 digits)
300 to 750 V 1 V ±(2% m.v. + 2 digits)
  • • Frequency range: 45 to 65Hz

Capacitance measurement 

Display range Resolution Accuracy
1 to 999 nF 1 nF ±(5% m.v. + 5 digits)
1.00 to 49.99 µF 0.01 µF
  • • Measurement of capacitance is available only during RISO measurement (when discharging the object).
  • • Accuracy of measurement is met for tested capacitance connected in parallel with a resistance greater than 10 MΩ
  • • For measurement voltages below 100 V accuracy is not specified

Temperature measurement 

Display range Resolution Accuracy
-40.0 to 99.9 °C 1 °C ±(3% m.v. + 8 digits)
-40,0 to 211,8 °F 1 °F ±(3% m.v. + 16 digits)

Electric security

  • • type of insulation: double, according to EN 61010-1 and IEC 61557
  • • measurement category: IV 600 V (III 1000 V) according to EN 61010-1
  • • protection class acc. to EN 60529: IP40 (IP67 with closed cover)

Other technical data

  • • Power supply from: battery 12V or from electric grid 90 V to 260 V, 50 Hz / 60 Hz
  • • weight: ca. 15.5 lbs / 7 kg
  • • dimensions: 15.35" x 12.2" x 7.09" / 390 x 310 x 180 mm
  • • display: LCD 5,6'’ graphical
  • • data transmission: USB cable or Bluetooth®

The acronym “m.v.” stands for a “measured reference value”.

Data Sheet Resources

Reviews

Write Your Own Review

You're reviewing: Sonel MIC-10s1 10kV Class Insulation Tester

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Price

Applications

applications

Accessories

Accessories

No accessories available

Videos