We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The Simpson Falcon Series digital indicators are premium quality 1/8 DIN meters for industrial applications. Two input ranges are available, 20-199.9Hz or 20-1999Hz, with choice of RMS or Square Wave. The Falcon has a 0.56" bright red LED display for high visibility. Compactly designed for applications requiring minimal rear panel depth, the Falcon fits a standard 1/8 DIN panel cutout (92mm x 45mm) and requires less than 3" behind the panel. A screw terminal connector is a standard feature for easy wiring of the power supply and signal input connections.
DISPLAY | |
Type | 7- segment, red LED |
Height | 0.56” (14.2mm) |
| |
Overrange Indication | Most significant digit = “1”; other digits blank |
| |
POWER REQUIREMENTS | |
AC Voltages | 120 or 220VAC, ±10% 50/60Hz |
Power Consumption | 2.5VA min./4VA max. |
| |
ACCURACY @25°C | |
200 Hz | ±0.2% of input ±0.2 Hz |
2 KHz | ±0.2% of input ± 2Hz |
| |
INPUT LEVEL | 500mV to 250V RMS at 1.0MΩ impedance OR 5V to 24V Square Wave (DCoffset 2V maximum) |
|
|
Resolution | 200Hz = 0.1Hz |
| 2kHz =1Hz |
| |
ENVIRONMENTAL | |
Operating Temperature | 0 to 55°C |
Storage Temperature | -10 to 60°C |
Relative Humidity | 0 to 85% non-condensing @ 40°C |
Temperature Coefficient | (±0.05% of input ± 0.5 count)/°C |
Warm-up Time | Less than 15 minutes |
| |
CONVERSION | |
Technique | Frequency-to-voltage |
Rate | 3 samples per second, nominal |
Write Your Own Review