Skip to the beginning of the images gallery

Rotronic HygroClip HC2-S Standard Climate Probe

Be the first to review this product

SKU

HC2-S

Manufacturer:

Rotronic

Key Features:

Accuracy: ±0.8 %rh, ±0.1 K, at 23 °C ±5 K
Range of application: -50…100 °C / 0…100 %rh
Digital interface (UART) and scalable analog outputs, 0…1 V
Standard output scaling: 0…1 V = -40…60 °C / 0…100 %rh
Adjusted at 23 °C and 10, 35, 80 %rh

Ship to

Calculate Shipping Cost

Country

State/Province

Zip/Postal Code

Qty

$515.00

Secured and trusted checkout with

Product Detail

The Rotronic HC2-S probe has an accuracy of ±0.8 %rh, ±0.1 K, at 23 °C ±5 K.

Fast response
• By decoupling the Pt100 temperature sensor from
the probe, thermal response is significantly improved

Innovative filter technology
• The latest in filter technology provides a high level of
   protection and maintains the optimum measurement
   environment for the Hygromer humidity and Pt100
   temperature sensors

AirChip3000
• Compensates humidity and temperature
over 30,000 reference points
• 2,000 data point memory
• Dew/frost point calculation
• Sensor auto-diagnostics and automatic correction
• Active alarming and information
• ASIC (Application Specifi c Integrated Circuit),
micro-controller and EEPROM on one chip

Maximum flexibility
• The UART 1 interface and user scalable analog outputs allow
the probe to be used as a stand-alone device that can also
be effortlessly integrated into an OEM application
• The probes can be interchanged without adjustment

1 Universal Asynchronous Receiver Transmitter

Short Description

Probe type	Standard probe
Dimensions	15 x 82 mm
Weight	10 g
Operating range electronics	-50…100 °C / 0…100 %rh
Accuracy at 23 ±5 °C	±0.8 %rh / ±0.1 K
Accuracy w. adjustment profile "standard"	at 23 °C / 10, 35, 80 %rh ± 0.8 %rh / ± 0.1 K
Power supply / Power consumption	3.2…5 VDC ±0 % / < 4.5 mA
Current consumption	4.5 mA at 3.3 VDC
Long-term stability sensor	<1 %rh / year
Humidity sensor	Hygromer IN-1
Temperature sensor	Pt100 Class A
Probe protection	Polycarbonate plastic cage, black
Filter cartridge	Polyethylene
Filter type	Wire mesh filter
Response time t 63	<15 sec.
Allowed wind speed	20 m/s, with filtre
Psychrometric calculations	Dew or frost point
Reproducibility Airchip	<0.02 %rh / 0.01 K
Exploitation software	ROTRONIC HW4.2
Probe adjustment by software	1 Point & multipoint %rh & °C
Firmware update	With internet and HW4 software
User information	from Software HW4 (devicemanager)
Data processing via HW4	with interface cables
Device Protection by password	Yes
Type of output signals	2 x 0…1 VDC
Analogue outputs scaleable by the user	Yes
Analog output signal (standard)	0…1 V = 0…100 %rh; 0…1 V = -40…60 °C
Digital output signal (standard)	UART
Service Interface	UART
Reverse voltage protection	Mechanically in the connector
Max. cable length	5 m
Probe material	PEEK
Enclosure material	Polycarbonate
Housing	Polycarbonate
FDA/GAMP compatibility	FDA 21 CFR Part 11 and GAMP compatible