We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The ACT-1B Panel Tachometer can be factory configured to meet your specifications or user configured on site with the optional USB Programming Cable and Software.
All models - Universal Input, non-contact operation from optical, infrared, laser, proximity, and magnetic sensors or direct TTL and 200mV to 50 Vac signals
Speed Range: | 5 to 99,999 RPM |
Accuracy: | ±1 RPM or 0.005% of reading |
Resolution: | 1 RPM |
Display: | 5 digit, 0.56” (14 mm) high red LED. |
Display Update: | Twice per second above 120 RPM. Programmable with PM Remote Software and USB programming cable. |
Dimensions: | 1/8 DIN by 4.5” (114 mm) deep. Panel cutout: 3.58” x 1.74” (91 x 44mm) |
Input Power: | Standard: 100 - 240 Vac ±10%, 50/60 Hz Optional: 12 or 24 Vdc ±10%, Isolated, 6.0 Watts. |
Inputs: | Universal input for optical, proximity, two wire or three wire magnetic, infrared or laser sensors. TTL input or 1.5 Vac to 50 Vac input. Standard input is 1 pulse per revolution. |
Sensor Excitation: | 5Vdc or optional 12Vdc or 24Vdc to sensor. |
Recommended Sensors: | Optical - Monarch ROS-W, ROS-P-25, ROS-HT-W-25, ROSM-5W Proximity - Monarch P5-11 Magnetic - Monarch M-190W or MT-190W Infrared - Monarch IRS-W Laser - Monarch ROLS-W, SLS-115/230 Inductive - Gas Engine GE-200 |
Analog Output: (Optional) | VOLTAGE (AO): 0 to 5 Vdc out, 5 mA 16 bit resolution. Full scale RPM settings as specified when ordered or programmable using PM Remote Software and USB programming cable. or CURRENT (IO): 4 to 20 mA out, 16 bit resolution 12Vdc compliance voltage. Full scale RPM settings as specified when ordered or programmable using PM Remote Software and USB programming cable. |
Pulse Output: (Optional) | 0 to 5 V TTL pulse, non-inverting, one pulse out for each pulse in. Positive or negative out. Programmable using PM Remote Software and USB programming cable. |
Remote Programming: | Unit can be remotely programmed using optional communications interface cable and PM Remote Software. |
Environmental: | Indoor use only, Installation category II per IEC 664 Temperature: -10°C to 50°C operating per IEC 61010-1 Humidity: Maximum relative humidity 80% for temperatures up to 31°C, decreasing linearly to 50% relative humidity at 40°C. |
Electrical Safety: | Meets EN61010-1:2001, EC low voltage directive 72/23/EEC and 89/336/EEC |
*Requires optional USB programming cable and PM Remote Software
Write Your Own Review