Meriam M200LS Lab Standard Smart Manometer - DISCONTINUED

Key Features:

This Product is DISCONTINUED
Please see the Meriam M2000 as a Replacement

• Accuracy Accuracy: + 0.01% FS (+ 0.02% F.S. for DN0028) No temperature effect from 59° to 86° F (15° to 30° C).
• Engineering Units Inches of H2O (select 4° C, 20° C, or 60° F), PSI, mm of Hg, inches of Hg, mBars, Bars, kPa, kg/cm2, cm of H2O and user selectable scaling.
• Media Compatibility DN: Non-isolated differential sensor for clean, dry, non-corrosive gases. GI & AI: Isolated Gauge or Absolute sensor for fluids compatible with 316L SS. See Meriam’s M200-DI for wet/wet DP requirements.
• Pressure Limits Twice range on Gauge and Absolute (GI and AI) units. Twice range on Differential (DN) units when pressurized on high side only and 150 PSI (10.5 kg/cm2) static when applied to both sides of the sensor simultaneously.
• Auto Shut-Off User selectable shut-off. Programmable for Disable, 10, 20, 30, 45, 60 minutes.
• Leak Test Allows users to view Min/Max pressure values and calculates leak rate per minute in pressure units. The feature is very handy when troubleshooting or pressure testing pneumatic systems.
• Auto Record Document up to 240 readings (automatically or manually) to reduce paperwork and field time. Saved readings can be recalled at any time.
• Damping Rates Exponential damping with user selectable time constant from 0.1 to 25 seconds.
• Min/Max Capture Capture speed is equal to the selected damping rate.
• Field Re-cal The M2 series can be recalibrated in the field for zero, span, and linearity. The user has the option to select a 1 point or 5 point calibration procedure. Enables users with accurate primary standards to calibrate their devices locally if desired.