We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Flowline Thermo-Flo XT10 is offered in liquid and gas sensor types, the general purpose flow switch provides reliable low or no-flow detection of relatively clean, non-coating media with one 1A relay output. Liquid examples water and acetic acid. Available in Polypropylene-Ryton®, the short flow sensor is used in pipe or ducting from 1/2" to 1 1/2", and the long flow sensor is used in 2" and up. The flow switch set point may be adjusted from 0.04 to 3 fps in liquids, or 1 to 90 fps in gases as a low-flow alarm. The flow sensor is best applied in applications with relatively constant temperature.
If you want the FT10/GT10 with the PVDF sensor material Click Here.
| Set point range: | FT10: 0.04 to 3 fps (0.012 to 0.91 mps) GT10: 1 to 90 fps (0.3 to 27 mps) |
| Factory set point: | FT10: 2 fps (.06 mps) GT10: 10 fps (27 mps) |
| Repeatability: | ± 0.5% of set point @ fixed temperature |
| Response time: | 1-10 seconds |
| Set point adjust.: | Potentiometer |
| Viscosity range: | FT10: 1-200 centipoise |
| LED indication: | Flow status |
| Supply voltage: | 12-36 VDC |
| Consumption: | 70 mA maximum |
| Contact type: | (1) SPST relay |
| Contact rating: | 60 VA, 1A maximum |
| Contact output: | Selectable NO / NC |
| Process temp.: | F: 32° to 140° C: 0° to 60° |
| Ambient temp.: | F: -40° to 140° C: -40° to 60° |
| Pressure: | 150 psi (10 bar) @ 25º C, derated @ 1.667 psi (0.113 bar) per ºC above 25º C |
| Sensor rating: | NEMA 4X (IP65) |
| Wetted material: | -1XX5: PP-Ryton® -5XX5: PVDF |
| Cable jack. mat.: | -1XX5: PP -5XX5: PFA |
| Cable type: | 4-conductor, shielded #22 AWG |
| Cable length: | 10' (3m) |
| Process mount: | 3/4" NPT (3/4" G) |
| Mount. gasket: | Viton® |
| Classification: | General purpose |
| Compliance: | CE |
Dimensions
Write Your Own Review
