We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Revolutionizing the industry, FLIR is offering their MR160 Imaging Moisture Meter with IGM. The MR160 is equipped with Infrared Guided Measurement (IGM) technology, fueled by a FLIR Lepton thermal imaging sensor, allowing for the rapid identification of temperature patterns that indicate potential concealed moisture.
Thermal Imaging | |
---|---|
Thermal Imaging Detector | FLIR Lepton microbolometer |
Image Calibration | Automatic |
Thermal Image Resolution | 4800 pixels (80 × 60) |
Spectral Response | 8–14 μm |
Field of View | 51° × 38° |
Thermal Sensitivity | < 0.15 °C |
Image Frame Rate | 9 Hz |
Image Display | Color Moisture Alert |
Minimum Focus Distance | 10 cm (4”) |
Moisture Measurement | |
---|---|
Pin Moisture via External Probe Range (Accuracy) | 0–100% WME (± 5%) |
Pin Moisture Groups | 9 material groups |
Pinless Moisture Range | 0–100 relative measurement |
Pinless Measurement Depth | 0.75" (19mm) Max |
Measurement Resolution | 0.1 |
Response Time Pinless | 100 ms |
Response Time Pin Mode | 750 ms |
General Information | |
Display Type | QVGA (320 x 240 pixel) 2.3” 64k color TFT |
Saved Image File format | BMP with measurement values overlaid |
Stored Image Capacity | 9999 images |
Laser Orientation | Single laser pointer to center of thermal image |
Power Requirements | Integrated rechargable battery |
Battery Power - Continuous Run Time / Typical Usage | 18 hours max / 4 work weeks |
Battery | 3.7 V, 3000 mAh Li-ion rechargeable via micro USB |
Drop Test | 9.8’ (3m) |
Certification Standards | EN61326 (EMC), EN61010 (Battery + Charger), EN60825-1 Class 2 (Laser) |
Agency Approvals | FCC Class B, CE, UL |
Warranty | 2 Yr Product, 10 Yr Thermal Detector |
Write Your Own Review