Skip to the beginning of the images gallery

Amprobe AMP-220 600A AC/DC TRMS Clamp Meter

Be the first to review this product

SKU

AMP-220

Manufacturer:

Amprobe

Key Features:

Measures AC/DC Current to 600 A and AC/DC Voltage to 600 V
Features True-RMS sensing for accurate voltage measurements in noisy electrical environments
Amp-Tip delivers precise low AC current measurements – 0 to 60 A
Includes a low pass filter to accurately measure voltage and current on variable frequency drives
Capacitance measurement, continuity beeper and diode test
Provides resistance and continuity measurement capabilities to verify the quality of electrical connections and the proper operation of motor and transformer coils
Offers data hold and relative zero for quick analysis
Maximizes battery life with auto power off and low battery indicator
Backlit display for easy measurement viewing in bright and dim environments
Accommodates conductors up to 1.37 in (35mm)
Includes test leads, batteries (installed), carrying case, and user manual
CAT III 600 V safety rated

Product Options:

Amprobe AMP-220 Calibration Options

None

Standard Calibration Certificate + $98.00

ISO 17025 Accredited Calibration Certificate + $160.00

Ship to

Calculate Shipping Cost

Country

State/Province

Zip/Postal Code

Qty

$233.99

Secured and trusted checkout with

Product Detail

With True-RMS sensing, non-contact voltage detection, a rapid response processor, resistance, continuity and capacitance measurements, its efficiency and safety are both widely enhanced in today’s multifaceted electrical environments. Its Amp-Tip functions provide precise measurement of current down to the tenth of an Amp, performing accurate current measurement of large and small diameter wires.

Short Description

Model	AMP-210	AMP-220
	AC Clamp Meter Electrical	AC/DC Clamp Meter Electrical
Safety Rating	CAT III 600 V	CAT III 600 V
Jaw Opening	1.18 in (30 mm)	1.37 in (35 mm)
AC Voltage (True-RMS)	Range: 0 to 600.0 V Accuracy: ±1.0% + 5LSD (50 to 60 Hz)
DC Voltage	Range: 0 to 600.0 V Accuracy: ±1.0% + 5LSD
AC+DC Voltage	–	Range: 0 to 600.0 V Accuracy: 1.2% ±7LSD (DC, 50 to 60 Hz)
AC Current (True-RMS)	Range: 0 to 600.0 A Accuracy: ±1.8% + 5LSD (50 to 100 Hz) ±2.0% + 5LSD (100 to 400 Hz)
DC Current	–	Range: 0 to 600.0 A Accuracy: ±2.0% + 5LSD
AC+DC Current	–	Range: 0 to 600.0 A Accuracy: ±2.2% + 7LSD (DC, 50 to 100 Hz) ±2.7% + 7LSD (100 to 400 Hz)
Precise Low Current AC	Range: 0 to 60.00 A Accuracy: ±1.5% + 5LSD (50 to 60 Hz)
Precise Low Current DC	–	Range: 0 to 60.00 A Accuracy: ±2.0% + 5LSD
Precise Low Current AC+DC	–	Range: 0 to 60.00 A Accuracy: ±2.0% + 5LSD (DC, 50 to 60 Hz)
Frequency	Range: 5.00 to 999.9 Hz Accuracy: ±1.0% + 5LSD (600 V range) Range: 50.0 to 400.0 Hz Accuracy: ±1.0% + 5LSD (600 A range)
Resistance	Range: 0.0 to 60.00 kΩ Accuracy: ±1.0% + 5LSD
Capacitance	Range: 0.0 to 2500 µF Accuracy: ±2.0% + 4LSD
Continuity Beeper	ON ≤ 10 Ω OFF > 250 Ω
Non-Contact Voltage	20 to 440 V, 50/60 Hz
True-RMS	•	•
Low Pass Filter	•	•
Autoranging	•	•
Relative Zero	•	•
MAX/MIN/AVG	•	•
Diode Test	•	•
Data Hold	•	•
Backlight	•	•
Auto Power Off	•	•

Model	AMP-210	AMP-220
Display	3-5/6 digits 6000 counts	3-5/6 digits 6000 counts
Polarity	Automatic	Automatic
Update Rate	5 per second nominal	5 per second nominal
Operating Temperature	32 to 104°F (0 to 40°C)	32 to 104°F (0 to 40°C)
Relative Humidity	80% at 30°C, 50% at 40°C	80% at 30°C, 50% at 40°C
Operating Altitude	0 to 2000 m	0 to 2000 m
Pollution Degree	2	2
Storage Temperature	-4 to 140°F (-20°C to 60°C), < 80% RH	-4 to 140°F (-20°C to 60°C), < 80% RH
Temperature Coefficient	Nominal 0.15 x (specified accuracy)/ °C @ (0°C to 18°C or 28°C to 40°C)	Nominal 0.15 x (specified accuracy)/ °C @ (0°C to 18°C or 28°C to 40°C)
Battery	Two AAA 1.5 V battery	Two AAA 1.5 V battery
EMC	Meets EN 61326-1:2006	Meets EN 61326-1:2006
Safety Compliance	UL/IEC/EN 61010-1 ed. 3.0, IEC/EN 61010-2-033 ed. 1.0, CAN/CSA C22.2 NO. 61010-1 ed. 3.0, IEC/EN 61010-2-032 ed. 3.0 & IEC/EN 61010-031 ed. 1.1	UL/IEC/EN 61010-1 ed. 3.0, IEC/EN 61010-2-033 ed. 1.0, CAN/CSA C22.2 NO. 61010-1 ed. 3.0, IEC/EN 61010-2-032 ed. 3.0 & IEC/EN 61010-031 ed. 1.1
Certification	UL (c/us) and CE	UL (c/us) and CE
Dimensions (L x W x H):	8.62 x 3.03 x 1.46 in (219 x 77 x 37 mm)	8.82 x 3.03 x 1.46 in (224 x 77 x 37 mm)
Weight:	208 g (0.46 lb)	254 g (0.56 lb)

Accessories Included:
User’s Manual	•	•
Test Leads	•	•
Carrying Case	•	•
Batteries	AAA (2)
Alligator Clip Set	–	–
Banana plug K-type Thermocouple	–	–

Data Sheet Resources

Data Sheet

Amprobe AMP-220 Data Sheet

Manuals

Amprobe AMP-220 User Manual

Reviews

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account

Applications

Accurate measurement of current, voltage and frequency on all electrical systems including distorted, non-sinusoidal signals (True-RMS function) and variable frequency drives (low-pass filter).

Capacitance measurement for start and run motor capacitors.

Resistance and continuity functions to verify quality of electrical connections and to check if motor and transformer coils are working properly.

Low pass filter allows measurement of current and voltage on variable frequency drives (motors with speed controlled by frequency). Without this feature, the meter would provide erroneous readings when measuring voltage and current.

Accessories

Videos