We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Amprobe’s ACD-10 PLUS meter offers thinner jaws over standard clamp meters. Allowing access to tight measurement areas and still accommodating conductors up to 25 mm. It also measures Capacitance and Frequency. Frequency is measured by either jaws or test leads. Very versatile clamp multimeter.
FEATURE | ACD-10 PLUS | ACD-10 TRMS-PLUS |
True-rms | • | • |
AC Voltage | 4.000 V, 40.00 V, 400.0 V, 600 V | |
DC Voltage | 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600 V | |
AC Current | 40.00 A, 400.0 A, 600 A | |
Resistance | 400.0 µΩ, 4.000 Ω, 40.00 Ω, 400.0 Ω, 4.000 MΩ, 40.00 MΩ | |
Capacitance | 500.0 nF, 5.000 F, 50.00 CF, 500.0 µF, 3000 µF | |
Frequency | 40 Hz → 400 Hz with Jaw, 10 Hz → 100 kHz with test leads | |
Temperature | - | - |
Dual displays | - | - |
Micro Amps | - | - |
Accommodates conductors | up to 1.0''(25 mm) in diameter |
Specifications | |
Display: | 3-3/4 digits 4000 counts LCD display |
Update rate: | 3 per second nominal |
Polarity: | Automatic |
Operating temperature: | °C to 40 °C; < 80% RH for temperature up to 31 °C decreasing linearly to 50% RH at 40 °C |
Altitude: | Operating below 2000m; Indoor use |
Storage temperature: | -20 °C to 60 °C, < 80% RH (with battery removed) |
Temperature coefficient: | nominal 0.15 x (specified accuracy)/°C @(0 °C ~ 18 °C or 28 °C ~ 40 °C) |
Low battery: | Below approx. 2.4V |
Power supply: | 3V coin battery IEC-CR2032 |
Power consumption: | 2.8 mA typical except that 3.3 mA typical for ACA function |
APO timing: | Idle for 30 minutes |
APO consumption: | 5 µA typical |
Jaw opening & conductor diameter: | max 26 mm |
Special features: | 30ms Max Hold; Data Hold; Relative Zero mode |
Write Your Own Review