We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
MODELS | CA1725 & CA1727 |
MEASUREMENTS | |
Rotational Speed Function | Range: 6 to 100,000rpm Resolution: 0.0006 to 6rpm depending on range Accuracy: 1x10-4 of Reading ± 6 counts |
Linear Speed Function | Range: 0.1 to 10,000m/min or ft/min Resolution: 0.0006 to 6m/min depending on range Accuracy: 1x10-4 of Reading ± 1 increment |
Frequency Function | Range: 0.1 to 10,000Hz Resolution: 0.0004 to 0.4Hz depending on range Accuracy: 4x10-5 of Reading ± 4 counts |
Period Function | Range: 0.1 to 10,000ms Resolution: 0.0003 to 0.3ms depending on range Accuracy: 1x10-4 of Reading ± 5 counts |
Duty Cycle Function | Range: 10 to 10,000% Resolution: 0.1 to 1% depending on range Accuracy: 0.1% of scale from 0.2 to 50Hz 0.2% of scale from 50 to 125Hz / 1% of scale otherwise |
Count function | Range: 0 to 99,999 events; Accuracy: ± 1 event (Model CA1727) |
GENERAL | |
Power Source | 9V battery Alkaline (included) |
Battery life | 250 x 5 min measurements with optical sensor; 600 x 5 min measurements with external sensor |
Data Storage | 4000 measurements (Model CA1727) |
Dimensions | 8.5 X 2.83" (216 x 72 x 47mm) |
Weight | 8.8 oz (250g) |
Weatherproofing | IP51 |
Environment | Storage: -4 to +158°F (-20 to +70°C) 95% RH; Operation: 32 to 131°F (0 to 55°C) 90% RH |
SENSOR | |
Optical | Reflective area: 10 to 90% of the target area. Measurement distance: 1 to 50cm. The maximum distance is given for a reflective adhesive strip with a minimum area of 10cm2. Measurement angle: ±15° in relation to the perpendicular of the reflective surface. |
Mechanical | Mechanical adapter: End-fittings: elastomer with a durometer hardness of 80 Pressure on moving part: between 2 and 40N; maximum speed: 10,000rpm Service life: approx. 1000 hours at 3000rpm with a pressure of 20N |
Conical end-fitting accessory: Minimum diameter of measurement shaft: 5mm | |
Cylindrical end-fitting accessory: Speed measurements on shafts with a diameter greater than 5mm or flat-ended shafts | |
End-fitting accessory with wheel; Wheel diameter: 30.183mm; Wheel development: 10cm ± 0.1mm |