We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The AX503 DC linear power supplies is designed for use in a wide variety of applications. It is equally at home in the precise needs of an electronic design lab, as well as the continuous operation required on a production test line. The state of the art linear technology provides a highly stable, low noise output with less than 1mV of ripple on each output. Active protection circuitry provides an extra level of insurance against damage from short circuits, overloads, and over heating. Highly efficient toroidal transformers allow these supplies to operate without fans, thus eliminating noise and electromagnetic emissions.
The Model AX503 offers a 5V blind output which is adjustable from 2.7 to 5.5V. Dual 30V outputs can be connected in series to provide double the output voltage up to 60V, or they can be connected in parallel providing double the current output up to 5A. The Model AX503 offers a unique master/slave tracking arrangement whereby the ratio between master and slave can be setup on the fly as needed during the test. Adjusting the master voltage causes the slave to track. Adjusting the slave voltage causes the ratio from master to slave to change accordingly. It offers a Coarse and Fine voltage adjustment as well as current limiting adjustment. The Model AX503 is built to provide many years of reliable, precise, easy-to-use operation and will be a welcome addition to any lab, test bench or production line.
MODELS | AX502 | AX503 |
Number of Outputs | 2 | 3 |
VOLTAGE | ||
Output 1 & 2 | 0 to 30VDC | 0 to 30VDC |
Output 3 (No display) | – | 2.7 to 5.5VDC |
Display Resolution | 100mV | 100mV |
Basic Accuracy | ±0.5% of Reading ± 1ct | ±0.5% of Reading ± 1ct |
Residual Ripple | ±1mVrms | ±1mVrms |
LINE REGULATION | ||
±10% Line Voltage | ±0.03% of Reading ± 2mV | |
LOAD REGULATION | ||
0 to 2.5A | ±0.02% of Reading ± 5mV | |
0 to 5A | – | ±0.2% Reading ±10mV |
CURRENT | ||
Output 1 & 2 | 0 to 2.5A | 0 to 2.5A |
Output 3 | – | 5A max (no adjustment) |
Resolution | 10mA | 10mA |
Basic Accuracy | ±0.5% of Reading ± 1ct | ±0.5% of Reading ± 1ct |
Limit Indicator | LED, Outputs 1 and 2 | LED, Outputs 1, 2 and 3 |
Short-circuit Protection | Electronic current limitation with voltage shutdown | |
Overheating Protection | Thermal protection | |
OUTPUT COUPLING | ||
Tracking | Output 1: Master/Output 2: Slave Proportional Slave Tracking (0 to 100% of Master) | |
Series Mode | 0 to 60VDC/0 to 2.5A | |
Parallel Mode | 0 to 30VDC/0 to 5A |
- • Engineering design labs
- • Production testing
- • Educational labs
- • Quality assurance testing
- • Approval agency testing
- • Repair and calibration labs