We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The 12X series pressure manifolds are designed for expanding pressure test ports during pressure calibration. The Additel 121 and 125 pressure manifolds are used for pneumatic pressure calibration up to 3000 psi (200bar), while the Additel 123 and 126 manifolds are compatible to hydraulic pressure applications up to 10,000 psi (700 bar). A filter is built-in with the 121 and 125 pneumatic pressure manifolds to prevent contamination introduced by devices under test. There are four hand-tight quick connectors pre-installed on each manifold. The manifold arms of the 125 and 126 are foldable to allow the user to adjust the position of the DUTs. Additel 12X series pressure manifolds allow you to connect without the use of wrenches or Teflon tape which increases your productivity when using calibration pumps, pressure controllers, dead weight testers, or piston gauges.
Model | Description |
ADT121-N | 1/4NPT male hose to four 1/4NPT female hand-tight quick connectors |
ADT121-N2 | 1/2NPT male hose to four 1/2NPT female hand-tight quick connectors |
ADT121-M | M20×1.5 male hose to four M20×1.5 female hand-tight quick connectors |
ADT121-B | 1/4BSP male hose to four 1/4BSP female hand-tight quick connectors |
Note: A test hose (female adapter to male adapter) is included with every Additel 12X pressure manifold.
Write Your Own Review