Aalborg T Series Flow Meter (65 mm Scale)

SKU
T16T
Manufacturer:
Aalborg
Aalborg

Key Features:

  • Constructed of inert materials: borosilicate Glass, Teflon (PTFE and PCTFE)
  • Chemically inert wetted parts within mechanically rigid frame
  • Rib-guided or fluted metering tubes facilitate stable, accurate readings
  • Magnifier lens in front shield to enhance reading resolution
  • OPTIGRAD scales minimize parallax and eye fatigue
  • Simple means of panel mounting. Panel mounting is convertible to bench mounting through the use of an optional acrylic tripod base with spirit leveler (catalog No. TP1)
  • Interchangeability of flowtubes and floats. Assorted flowtubes may be used in conjunction with a single mounting frame, an apparent benefit in many laboratory applications
  • Conveniently overlapping flow ranges available in both standard millimeter and "direct reading" scales
Product Options:

Maximum 25 characters

Maximum 25 characters

Maximum 25 characters

Maximum 25 characters

$229.00

Secured and trusted checkout with

Designed for low to medium flow rates for highly corrosive or ultra-pure liquids and gases. Aalborg T series scale length is 65 mm.

Incorporating the principles of traditional variable area flow technology, these rugged Teflon® PTFE-Glass flowmeters offer solutions to low to medium flow range measurements of highly corrosive or ultra-pure liquids and gases. Wetted inert components are surrounded by structurally rigid anodized aluminium. The resultant design represents a unique combination of a rugged mechanically rigid frame and chemically inert wetted parts. For additional protection of personnel each meter is supplied with a thick protective magnify-ing safety shield.

Shipped completely assembled, flowmeters include standard mounting fittings in a choice of materials, side plates, thick protective magnifying front shield and back plate, optional built-in control valve, and flowtubes selected from the Flow Capacities tables. Panel mounting style is convertible to bench mounting through the use of the optional acrylic tripod. The tripod has a built-in spirit leveler and leveling screws.

BUILT-IN VALVES


Meters are available with built-in needle valves (CVT™ ), high precision metering valves (HRT™) with “non-rising stems”, or with no valves. The higher cost of HRT™ valves is justified whenever high sensitivity control and resolution are desirable particularly in conjunction with metering tubes of very low flowrates.


When meters with valves are ordered the valve cartridges are installed at the inlet. For vacuum service it is 
recommended that meters are ordered with valves at the outlet.

STANDARD ACCURACY±2% FS mm scales except 042 and 032 flow
tubes. ±5% FS direct reading scales 042 and
032 flow tubes.
REPEATABILITY± 0.25%.
USEFUL FLOW RANGES10:1 minimum with one float.
MAXIMUM OPERATING PRESSURE100 psig/6.7 bars.
MAXIMUM OPERATING TEMPERATURE150 °F/ 65 °C.
LEAK INTEGRITYIndividually pressure and leak tested and
certified to a rating of 1 x 10-7 sccs Helium.
 
**MATERIALS OF CONSTRUCTION
FLOW TUBESHeavy walled borosilicate glass.
(Sapphire or glass floats recommended).
FITTINGS IN CONTACT WITH FLUIDSVirgin PTFE PCTFE.
SIDE PLATESAluminum, black anodized.
FRONT SHIELD AND BACK PLATE1/8" thick clear polycarbonate and
white acrylics.
O-RINGSPTFE.
CONNECTIONS
OPTIONAL
1/8" NPT female inlet and outlet connections.
glass hose nipples or compression fittings.

**The selection of materials of construction, is the responsibility
   of the customer. The company accepts no liability.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account