We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Cover a pressure range from 1 PSI to 10,000 PSI with Setra’s 209 pressure sensor. The 209 was conceived as a solution for industrial and OEM customers searching for a top performing, reliable and versatile pressure sensor. Offering a superior accuracy of ±0.25% FS, Setra’s 209 boasts a true low range sensor. The sensor provides high performance without the need of further amplification necessary to satisfy range requirements as low as 1 PSI.
The 209 offers a wide range of adaptability, making it ideal for numerous applications. Its patented optional overpressure stop guards the sensor against unpredicted spikes or in high pulsation applications. Likewise, with the many pressure and electrical fittings offered, the 209 can fulfill an expanse of installation configurations.
Performance Data | Environmental Data | ||
Accuracy RSS1 (at constant temp) | ±0.25% FS | Operating3 Temperature °F (°C) | -40 to + 185 (-40 to +85) |
Non-Linearity, BFSL | ±0.22% FS | Storage Temperature °F (°C) | -40 to + 185 (-40 to +85) |
Hysteresis | 0.10% FS | Shock3 | 200g operating |
Non-Repeatability | 0.05% FS | Acceleration | 10 g Maximum5 |
Thermal Effects | Shock3 | 200g Operating | |
Compensated Range °F (°C) | -4 to +176 (-20 to +80) | Vibration4 | 20g |
Zero Shift %FS/100°F (%FS/50°C) | ±2.0 (±1.8) | Environmental Protection | Weather Resistant |
Span Shift %FS/100°F (%FS/50°C) | ±1.5 (±1.3) | Electrical Data (Voltage) | |
Warm-up Shift | 0.1% FS Total | Circuit | 3-Wire (COM, OUT, EXC) |
Response Time | 5 milliseconds | Excitation | 9 to 30 VDC |
Long Term Stability | 0.5% FS/1 YR | Output6 | 0.5 to 5.5 VDC7 |
Pressure Media | Output Impedance | 10 ohms | |
Liquids and gases compatible with 17-4 PH Stainless Steel.2 | Electrical Data (Current) | ||
Physical Description | Circuit | 2-Wire | |
Case | Stainless Steel & Valox | Output8 | 4 to 20mA9 |
Wetted Material | 17-4 PH Stainless Steel | External Load | 0 to 800 ohms |
Electrical Connection | 2 ft. multiconductor cable | Minimum supply voltage (VDC) | 9+ 0.02 x (Resistance of receiver plus line) |
Pressure Fitting5 | 1/4” -18 NPT external, 17-4 PH Stainless Steel | Maximum supply voltage (VDC) | 30+ 0.004 x (Resistance of receiver plus line). |
Vent | Through cable | 1 RSS of Non-Linearity, Hysteresis, and Non-Repeatability. 2 Note: Hydrogen not recommended for use with 17-4 PH Stainless Steel. 3 Mil-Std. 202, Method 213B, Cond. C 4 Mil-Std. 202, Method 204, Cond. C 5 See ordering information for other fittings available (minimum quantities apply). 6 Calibrated into a 50K ohm load, operable into a 5000 ohm load or greater. 7 Zero output factory set to within ±50mV. Span (Full Scale) output factory set to within ±50mV. 8 Calibrated at factory with a 24 VDC loop supply voltage and a 250 ohm load. 9 Zero output factory set to within ±0.16mA. Span (Full Scale) output factory set to within ±0.16mA. Specifications subject to change without notice. | |
Weight (approx.) | 2.3 ounces (65 grams) | ||
| |||
Write Your Own Review
- Industrial OEM Equipment
- Hydraulic Systems
- Compressor Control
- HVAC/R Equipment
- Industrial Engines