Amprobe’s ACD-10 PLUS meter offers thinner jaws over standard clamp meters. Allowing access to tight measurement areas and still accommodating conductors up to 25 mm. It also measures Capacitance and Frequency. Frequency is measured by either jaws or test leads. Very versatile clamp multimeter.
40 Hz → 400 Hz with Jaw, 10 Hz → 100 kHz with test leads
Temperature
-
-
Dual displays
-
-
Micro Amps
-
-
Accommodates conductors
up to 1.0''(25 mm) in diameter
Specifications
Display:
3-3/4 digits 4000 counts LCD display
Update rate:
3 per second nominal
Polarity:
Automatic
Operating temperature:
°C to 40 °C; < 80% RH for temperature up to 31 °C decreasing linearly to 50% RH at 40 °C
Altitude:
Operating below 2000m; Indoor use
Storage temperature:
-20 °C to 60 °C, < 80% RH (with battery removed)
Temperature coefficient:
nominal 0.15 x (specified accuracy)/°C @(0 °C ~ 18 °C or 28 °C ~ 40 °C)
Low battery:
Below approx. 2.4V
Power supply:
3V coin battery IEC-CR2032
Power consumption:
2.8 mA typical except that 3.3 mA typical for ACA function
APO timing:
Idle for 30 minutes
APO consumption:
5 µA typical
Jaw opening & conductor diameter:
max 26 mm
Special features:
30ms Max Hold; Data Hold; Relative Zero mode
The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.