Pressure Specifications |
---|
Specification | 761A-LLP | 761A-D | 761A-500 | 761A-1K | 761A-APXR | 761A-BP |
---|
Max Pressure Range | 30 inH2O (75 mbar) | 35 psi (2.5 bar) | 500 psig (35 bar.g) | 1,000 pisg (70 bar.g) | Dependent on APXR | 1,200 hPasensor | Min Pressure Range | -30 inH2O (-75 mbar) | -13.5 psi (-0.95 bar) | -13 psi (-0.9 bar) | -13 psi (-0.9 bar) | Dependent on APXR | 100 hPasensor | Accuracy(1) | 0.05%FS | 0.02%FS | 0.02%FS | 0.02%FS | 0.01%FS | 0.01%FS | Stability | 0.005%FS or 0.05 Pa | 0.005%FS | 0.005%FS | 0.005%FS | 0.003%FS | 0.02 hPa | Pressure Type | Differential, Gauge | Differential, Gauge | Gauge, Absolute | Gauge, Absolute | Gauge, Absolute | Absolute | Over Range Indication | 1.2 | Resolution | 6 digits | Measurement Units | Pa, hPa, kPa, mPa, bar, mbar, psi, mmHg@0°C, cmHg@0°C, mHg@0°C, inHg@0°C, inH2O@4°C, mmH2O@4°C, cmH2O@4°C, mH2O@4°C, mmH2O@20°C, cmH2O@20°C, mH2O@20°C, inH2O@20°C, inH2O@68°F, kg/m2, mtorr, torr, lb/ft2, tsi, custom | Barometric Accuracy | N/A | N/A | 60 Pa | 60 Pa | 60 Pa | N/A | [1] One year accuracy (including 1 year stability). FS specification applies to the span of the module range. | [2] Specification based on gauge measurement. An additional 60 pa uncertainty will need to be included when measuring in absolute mode. Applicable only for use with the ADT761A-500 and ADT761A-1K | * Additel 761A calibrators support 160A intelligent digital pressure modules that are available for gauge, vacuum and absolute pressure from -15 psi to 60,000 psi (-1 bar to 4200 bar).For detailed specs, see the 160A pressure module data sheet. |
Electrical Specifications |
---|
Specification | Range | Resolution | Accuracy | Note |
---|
mA Measure | Auto-ranging, ±25 or ±50 mA | 0.1 μA | 0.008%RD+0.004%FS | Impedance<10Ω | V Measure | ±300 mV | 1 μV | 0.008%RD+0.002%FS | Impedance >1GΩ | Auto-ranging, ±5, ±12 or ±30 V | ±5V:20 μV | 0.008%RD+0.002%FS | Impedance >1MΩ | ±12V:100 μV | ±30V:100 μV | Loop Power Source | 24 V | N/A | ±0.24 V | 50 mA (Max Loading) | mA Source | 0 to 2.5 mA or 2.5 to 25 mA | 0-2.5 mA: 0.05μA | 0-2.5 mA: 0.008%RD+0.1 μA | 20 mA @ 1KΩ | 0-25 mA:0.5μA | 0-25 mA: 0.008%RD+1.0 μA | Power Source | 16 to 30 V | 1 V | ±0.5 V(24 V: ±0.24 V) | 70 mA (Max Loading) | V Source | 0 to 16 V | 250 μV | 0.008%RD+0.002%FS | | Pressure Switch | Mechanical Switch, Live Mechanical Switch, NPN Switch, PNP Switch | N/A | N/A | Response time<10 ms. If the switch is live, voltage range will be (3-30) V | Temperature Compensation | 5°C to 35°C | Temperature Coefficient | Outside of 5°C to 35°C: <±0.0005%RD+0.0001%FS/°C | Misuse Protection | Up to 30 V on any two sockets |
Internal Module Specification and Compatibility |
---|
Model | inH2O | mbar | Media | Accuracy (%FS)(1) | Burst Pressure | 761A-LLP | 761A-D | 761A-500 | 761A-1K |
---|
ADT155-20-DP025 | ±0.25 | ±0.62 | G | 0.2 (2) | 100x | • | | | | ADT155-10-DP050 | ±0.5 | ±1.25 | G | 0.1(3) | 100x | • | | | | ADT155-05-DP1 | ±1 | ±2.5 | G | 0.05(4) | 100x | • | | | | ADT155-05-DP2 | ±2 | ±5 | G | 0.05(4) | 100x | • | | | | ADT155-05-DP5 | ±5 | ±10 | G | 0.05(4) | 50x | • | | | | ADT155-05-DP10 | ±10 | ±25 | G | 0.05(4) | 20x | • | • | | | ADT155-05-DP20 | ±20 | ±50 | G | 0.05 | 20x | • | • | | | ADT155-05-DP30 | ±30 | ±75 | G | 0.05 | 20x | • | • | | | ADT155-05-DP50 | ±50 | ±125 | G | 0.05 | 3x | | • | | | ADT155-02-DP100 | ±100 | ±250 | G | 0.02 | 3x | | • | | | ADT155-02-DP150 | ±150 | ±350 | G | 0.02 | 3x | | • | | | ADT155-02-DP300 | ±300 | ±700 | G | 0.02 | 3x | | • | | | ADT155-02-DP400 | -380 to 400 | -950 to 1K | G | 0.02 | 3x | | • | | | ADT155-02-DP800 | -380 to 800 | -950 to 2K | G | 0.02 | 3x | | • | | | ADT155-02-DP1K | -380 to 1K | -950 to 2.5K | G | 0.02 | 3x | | • | | | [1] FS specification applies to the span of the module range. Accuracy includes one-year stability, except for DP025 to DP10 modules. | [2] Accuracy is a 6 months spec, 1-year long-term drift is 0.2%FS. | [3] Accuracy is a 6 months spec, 1-year long-term drift is 0.1%FS. | [4] Accuracy is a 6 months spec, 1-year long-term drift is 0.05%FS. | [5] Specification based on gauge measurement. An additional 60 pa uncertainty will need to be included when measuring in absolute mode.Applicable only for use with the ADT761A-500 and ADT761A-1K. |
Internal Module Specification and Compatibility (Gauge Pressure) |
---|
Model | psig | bar.g | Media | Accuracy (%FS)(1) | Burst Pressure | 761A-LLP | 761A-D | 761A-500 | 761A-1K |
---|
ADT155-02-CP10 | ±10 | ±0.7 | G | 0.02(5) | 3x | | • | • | | ADT155-02-CP15 | -13.5 to 15 | -0.95 to 1 | G | 0.02(5) | 3x | | • | • | | ADT155-02-CP30 | -13.5 to 30 | -0.95 to 2 | G | 0.02(5) | 3x | | • | • | • | ADT155-02-CP35 | -13.5 to 35 | -0.95 to 2.5 | G | 0.02(5) | 3x | | • | • | • | ADT155-02-CP50 | -13.5 to 50 | -0.90 to 3.5 | G | 0.02(5) | 3x | | | • | • | ADT155-02-CP100 | -13.5 to 100 | -0.95 to 7 | G | 0.02(5) | 3x | | | • | • | ADT155-02-CP150 | -13.5 to 150 | -0.95 to 10 | G | 0.02(5) | 3x | | | • | • | ADT155-02-CP200 | -13.5 to 200 | -0.95 to 14 | G | 0.02(5) | 3x | | | • | • | ADT155-02-CP300 | -13.5 to 300 | -0.95 to 20 | G | 0.02(5) | 3x | | | • | • | ADT155-02-CP500 | -13.5 to 500 | -0.95 to 35 | G | 0.02(5) | 3x | | | • | • | ADT155-02-CP600 | -13.5 to 600 | -0.95 to 40 | G | 0.02(5) | 3x | | | | • | ADT155-02-CP1K | -13.5 to 1K | -0.95 to 70 | G | 0.02(5) | 3x | | | | • | [1] FS specification applies to the span of the module range. Accuracy includes one-year stability, except for DP025 to DP10 modules. | [5] Specification based on gauge measurement. An additional 60 pa uncertainty will need to be included when measuring in absolute mode.Applicable only for use with the ADT761A-500 and ADT761A-1K. |
General Specifications |
---|
Specification | Description |
---|
User Interface | Color touch screen and/or keypad operation | | Four total: one electrical, high or low internal | Channels | pressure module, two external pressure modules | Enclosure IP Rating | IP31 | Battery | Rechargeable Li-Ion battery, typically 16 hours of operation, recharges in less than 5 hours. | Power | Rechargeable Li-Ion battery, external power 110/220 V power adapter 27 V | Display | 7” TFT touch screen 800 x 480 color | Communications | USB, LAN, Bluetooth, Wi-Fi | Weight | <17.52 lb (7.95 KG) | Size | 11.77 x 7.60 x 7.56 in (299 x 193 x 192 mm) | Certification | ISO17025 accredited certificate of calibration with NIST-traceable data | Data Storage | 6 GB | Data Logging | Up to 1,000,000 readings (data and time stamped) | HART Communicator | Read, configure and calibrate HART devices - DD files updated periodically | Task documentation | Up to 1000 tasks can be stored with data | Automation Functions | Switch test, auto step, leak test | User Interface Localization | English, German, French, Italian, Spanish, Portuguese, Chinese, Japanese, and Russian | Pump life | >100,000 cycles | Environmental Specifications | Operating temperature: 32 °F to 122 °F( 0°C to 50°C) | Compensated temperature: 32 °F to 122 °F( 0°C to 50°C) | Storage temperature: -20°C to 60°C ( -4 °F to 120 °F) | Humidity: <90%, non-condensing | Vibration and Shock | Vibration: 4g (20 to 2,000 Hz) | Shock: 8g, 1 meter drop test | Compliance | CE | Software Compatibility | ACal, Additel Land and Additel Link for access via mobile application | Warranty | 1 year |
Pressure Range |
---|
Type | Model | Pressure Range | High-Range Pressure Module | Low-Range Pressure Module |
---|
Range | Accuracy | Range | Accuracy |
---|
Low/Differential Pressure | ADT761A-LLP | -75 to 75 mbar (-30 to 30 inH2O) | DP30: -75 to 75 mbar (-30 to 30 inH2O) | 0.05%FS | User selectable from DP20 to DP025 | See Internal Module Table | ADT761A-D | -0.95 to 2.5 bar (-13.5 to 35 psi) | CP35: -0.95 to 2.5 bar (-13.5 to 35 psi) | 0.02%FS | User selectable from DP10 to CP30 | See Internal Module Table | Standard Accuracy Gauge/Absolute Pressure | ADT761A-500 | -0.9 to 35 bar (-13 to 500 psi) | CP500: -0.9 to 35 bar (-13 to 500 psi) | 0.02%FS | User selectable from CP10 to CP300 | See Internal Module Table | ADT761A-1K | -0.9 to 70 bar (-13 to 1000 psi) | CP1K: -0.9 to 70 bar (-13 to 1000 psi) | 0.02%FS | User selectable from CP30 to CP600 | See Internal Module Table | Precision Accuracy Gauge/Absolute Pressure | ADT761A-30R | -0.95 to 1 bar (-13.5 to 15 psi) | AP30R: -0.95 to 1 bar (-13.5 to 15 psi) | 0.01%FS | Single sensor only | ADT761A-50R | -0.95 to 2.5 bar (-13.5 to 35 psi) | AP50R: -0.95 to 2.5 bar (-13.5 to 35 psi) | 0.01%FS | Single sensor only | ADT761A-100R | -0.95 to 7 bar (-13.5 to 100 psi) | AP100R: -0.95 to 7 bar (-13.5 to 100 psi) | 0.01%FS | Single sensor only | ADT761A-300R | -0.9 to 21 bar (-13 to 300 psi) | AP300R: -0.9 to 21 bar (-13 to 300 psi) | 0.01%FS | Single sensor only | ADT761A-500R | -0.9 to 35 bar (-13 to 500 psi) | AP500R: -0.9 to 35 bar (-13 to 500 psi) | 0.01%FS | Single sensor only | ADT761A-1KR | -0.9 to 70 bar (-13 to 1000 psi) | AP1KR: -0.9 to 70 bar (-13 to 1000 psi) | 0.01%FS | Single sensor only |
|