ACCURACY 16 psiA Range | -S5 Option
| ± (0.05% of Full Scale) -10 to 50° C | Includes all effects of linearity, hysteresis, repeatability, temperature, and stability for one year. Easily switch between gauge (sealed gauge) and absolute pressure measurement. Only available with -S5 accuracy option. Calibrated in Vertical Orientation. Orientation Effect = ± 0.004 psi. | 100 psiA Range | 0 to 20% of Range | ±(0.02% of Full Scale) | Includes all effects of linearity, hysteresis, repeatability, temperature, and stability for one year. | 20% to 110% of Range | ±(0.1% of Reading) | Easily switch between gauge (sealed gauge) and absolute pressure measurement. | -S2 Option | ± (0.02% of Full Scale) 15 to 25° C ± (0.05% of Full Scale) -10 to 15° C, 25 to 50° C, typical
| -S5 Option | ± (0.05% of Full Scale) -10 to 50° C | 500, 1000, 2000, 3000, 5000, 10 000, 15 000 psiA Ranges | 15 psiA to 20% of Range | ±(0.02% of Full Scale) | Includes all effects of linearity, hysteresis, repeatability, temperature, and stability for one year. | 20% to 110% of Range | ±(0.1% of Reading) | All models indicate pressure from 0 psiA to Full Scale, but are only specified from 15 psiA to Full Scale. | -S2 Option | ± (0.02% of Full Scale) 15 to 25° C ± (0.05% of Full Scale) -10 to 15° C, 25 to 50° C, typical | -S5 Option | ± (0.05% of Full Scale) -10 to 50° C | Easily switch between gauge (sealed gauge) and absolute pressure measurement. |
OPERATING TEMPERATURE Temperature Range | -10 to 50° C (14 to 122° F) | Non-condensing. No change in accuracy over operating temperature range. |
DISPLAY Screen | 5.5 digits
| LCD readable in sunlight with bright backlight. | Single Line Display | 16.9 mm (0.67") high | PSV mode is intended for Pressure Safety Valve testing, and requires software to enable. | Dual Line Display | Main Display: 13.9 mm (0.55") Secondary Display: 5.3 mm (0.21") | Display Rate | 4 readings/second (standard) 8 readings/second (PSV mode) |
POWER The XP2i is Intrinsically Safe only if powered by one of the following battery types. ATEX/IECEx | Approved Battery Type | Ta= | Marking | Rayovac Max Plus 815 | -20 to 50° C | Ex ia IIC T4 Ga | Energizer E91 | Energizer EN91 | -20 to 50° C | Ex ia IIC T3 Ga | Duracell MN1500 |
CSA | Approved Battery Type | Ta= | Marking | Rayovac Max Plus 815 | -20 to 45° C | Class I, Division 1, A, B, C, D T4 | Energizer E91 | -20 to 50° C | Class I, Division 1, A, B, C, D T3C | Energizer EN91 | Rayovac Max Plus 815 |
3 x AA | 1500 hours, typical | Uses 3 alkaline AA (LR6) batteries. Use of backlight and/or RS232 reduces operating time. | Optional AC power supply available. Do not use AC power supply in hazardous locations. | Ultra Low Power | > 1 year, typical** | ** 20 minute recording interval or greater in LT5 mode. |
DATA/COMMUNICATION Digital Interface | RS232, DB-9F | For hazardous location product warnings, refer to the operation manual. |
DATALOGGING Capacity | 32 000 data points | DataLoggerXP Firmware Update may be purchased at time of order, or in an Upgrade Package later. | Storage Type | Non-volatile flash memory | Software available for download from our website. | Minimum Interval | 1 second | Compatible with 32 & 64 bit Windows 7, Vista, and XP (32 bit only). | Maximum Interval | 18 hours | Produces csv files, or uses Excel template files (samples included) to automatically format and graph data. | Min. Event Duration | 250 mS*** | *** Logging Type - Average with Peaks. |
ENCLOSURE Weight | 562 g (19.8 oz) | Weight includes batteries. | Rating | IP66 and IP67 | Submersible to 1 m for 30 minutes [IEC 60529]. | Housing | Diecast aluminum | Nickel plating over low copper, marine grade aluminum. | Keypad and Labels | UV Resistant Polyester | LCD protected from impact damage by 1.5 mm (0.06") thick polycarbonate lens under polyester window. | | | Skydrol compatible. |
SENSOR Wetted Materials | (wrench tight) 316 stainless steel | All welded, with a permanently filled diaphragm seal. | | (finger tight) 316 stainless steel and Viton® (internal o-ring) | Metal to metal cone seal; O-ring can be removed if necessary. | Diaphragm Seal Fluid | Silicone Oil | Optional connection on back. | Connection | Crystal CPF Female | 1/4" male NPT adapter included unless BSP, M20, or 15KPSIB is specified.
| | | 1/4" medium pressure tube system compatible with HiP LM4 and LF4 Series, Autoclave Engr SF250CX Male and Female Series. |
STORAGE TEMPERATURE Temperature Range | -40 to 75°C (-40 to 167°F) | Batteries should be removed if stored for more than one month. |
SPECIAL FEATURES The following requires the use of our free ConfigXP software. User Defined Unit | Allows the user to define and display any pressure units not included, or to use the gauge to display force, level, or other pressure related parameters. Reduce or increase displayed resolution. | PSV Mode | Intended for pressure safety valve / burst disk testing. 8 readings per second. Captures point at which valve opens, as well as reseat pressure. | Averaging | Smooths unsteady readings (1 to 10 samples). | Remove | Unwanted pressure units from Units button. | Disable | Peak pressure button. | Limit or Disable | Zero button. | Password Protect | Changes to configuration or calibration factor(s). | Save | Configuration to a file. | Copy | Configuration can be copied to other gauges. |
Optional Pressure Pump Systems
| A includes System A (pneumatic) 0 to 30 psi | | AH includes System A (pneumatic) 0 to 580 psi | | B includes System B (pneumatic) -25 inHg to 30 psi | | BHincludes System B (pneumatic) -25 inHg to 580 psi | | C includes System C (oil) 0 to 3,000 psi | | CH includes System C (oil) 0 to 5,000 psi | | DO includes System D (oil) 0 to 5,000 psi | | DW includes System D (water) 0 to 5,000 psi | | EOincludes System E (oil) 0 to 10,000 psi | | FOVincludes System F (oil) 0 to 15,000 psi | | FWVincludes System F (water) 0 to 15,000 psi | | GOincludes System G (oil) 0 to 15,000 psi | | GWincludes System G (water) 0 to 15,000 psi | | HOincludes System H (oil/pneumatic) -25 inHg to 580 psi and 0 to 5,000 psi |
|