The POE2000 helps quicken the installation and troubleshooting of PoE system devices. It can detect PSE-type/class, power source, polarity, voltage, current, power, and whether it is End Span (1/2, 3/6), Midspan (4/5, 7/8), or across all 4 pairs. If you are a VoIP phone and IP camera installer, you will know if there is power and a data pair available for your equipment. The useful test mode can distinguish if a standard PoE (36 to 60V) or non-standard (11 to 60V) passive PoE is being used. For inline power level monitoring the display alternates between Voltage, Current and Power and incorporates a step button for selecting specific data to display. No batteries required, the POE2000 uses system power when connected to a device.
Specifications
Connector Interface
2X RJ45 (PSE & PD Test Jacks)
Voltage Range
Standard PoE: 36 to 60V; Non-Standard: 11 to 60V
Max Current (based on 50V)
990mA/50W per mode; Total 2A/100W
Function Selection Mode
T Mode: for detecting PSE status
N Mode: for determining non-standard PoE + inline testing
I Mode: for testing & monitoring real-time power status
Display
4 LEDs indicate IEEE802.3af or 802.3at/bt standard
Dual 7-digit LEDs indicate power source either end (A) Span (1/2, 3/6) or Mid (B) span (4/5, 7/8) or both for bt
2 Yellow LEDs indicate reversed polarity for power type
Display alternates between Voltage, Current and Power
Step Button
For selecting specific data to display
Power
Uses system power when connected to a device
Dimensions/Weight
3.9 x 1.4 x 1 ” (99 x 36 x 26mm)/1.6oz (45.4g)
The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.