AEMC’s MR416 hall effect current probe with 2 ranges is crafted for DMM and Data loggers. The MR416 comes supplied with a 5 ft (1.5m) lead terminated by 4mm safety banana plugs and can measures up to 400AAC and 600ADC. The probe is powered by a 9V battery or by a standard 5V external power supply via a micro-USB connector (not supplied).
Specifications
Maximum Conductor Size
1.18” (30mm) or 2 bus bar 1.24 x 0.39” (31.5 x 10mm)
Current Range
0.5 to 40AAC, 60ADC & 0.5 to 400AAC, 600ADC
Output Signal
10mV/A & 1mV/A via a 5ft (1.5m) lead with 4 mm safety banana plug
Accuracy 50/60Hz
≤1.5% @ 40A & ≤2% @ 400A
Frequency Range
DC to 30kHz (-3dB) (depending of current value)
Phase Shift At 50Hz
≤2.2°@ 40A ≤1.5° @ 400A
Load Impedance
>1MΩ and ≤100pF
Overload
3000ADC or 1000AAC continuous for < 1kHz
Zero Adjust
Automatic on both ranges
Power Supply
9V alkaline Battery (NEDA 1060A, 6LR61) or 5V DC Micro-USB type B
Battery Life
50H typical
Low Battery Indication
Green LED blinking
Overload Indication
Red LED on when measurement > than selected range
Dimensions (H x W x D)
8.82 x 3.82 x 1.73” (224 x 97 x 44mm)
Weight (with Battery)
0.98lbs (440g)
Operating Temperature
14° to +131°F (-10 to +55°C)
Storage Temperature
-40° to +176°F (-40 to +80°C)
Relative Humidity
Up to 85% @ 35°C
Ingress Protection (Ip)
IP 40
EMC
EN 61326-1
Safety Compliance
IEC 61010-1, EN 61010-2-32, Pollution Degree 2, 600V CAT III CE
The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.