UEI’s DL200 CATIII Clamp Meter and Voltage Tester has a sliding jaw clamp that incorporates the convenience of a fork meter with the precision of a closed current clamp meter. The patent pending low profile sliding clamp jaw effortlessly opens to fit in small spaces and when closed it provides greater accuracy than open fork measurements. The DL200 is perfect for quick checks or validating installations with the essential features of AC and DC voltage, AC amps, resistance, continuity and data hold and safety rated to CATIII. Ergonomically designed, the DL200 has connected test leads and built-in test lead storage.
Specifications
AC Volts
Range
Resolution
Accuracy
Overload Protection
1V to 199.9V
0.1V
±(1.5% + 5 dgts)
600V
200V to 600V
1V
DC Volts
Range
Resolution
Accuracy
Overload Protection
1V to 20V
0.01V
±(1.5% + 3 dgts)
600V
21V to 200V
0.1V
201V to 600V
1V
Minimum measurement AC mV:500mV /DC mV:40mV Response time (input; AC 100V): 1 sec Max displayed value: 660V AC/DC High warning symbol input voltage > AC30V/ > DC30V Meter beeps input voltage > AC 601V/ > 601V DC Input impedance: 10MΩ TRMS frequency range: Sine wave: 45Hz to 400Hz Overload protection: 600V AC RMS or 600V DC
AC Amps
Range
Resolution
Accuracy
Overload Protection
1A to 200A
0.1A
±(2.0% + 5 dgts)
600V
Frequency range: sine wave: 45Hz to 400Hz Maximum displayed value: AC 220A Minimum displayed value: AC 500mA
Resistance
Range
Resolution
Accuracy
Overload Protection
200Ω to 2000Ω
0.1Ω to 1Ω
±(0.8% + 4 dgts)
600V
Max displayed value: 2200Ω Overload protection: 600V AC RMS or 600V DC
Continuity
Audible threshold
Response time
Output voltage
Overload Protection
Approx : < 40Ω
50ms
0.987V
600V
The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.