FUNCTIONAL SPECIFICATIONS Model:........................................................................ Type T Type:................................................ Hydraulic, piston gauge Pressure range:.........................to 100,000 kPa / 15,000 psi ................................................................ (model dependent) Accuracy (12 months):.................................to ±0.015% rdg Increments (low - min):.... 5 psi, 0.5 kg/cm2, 0.5 bar, 50 kPa Increments (high - min):.... 50 psi, 5 kg/cm2, 5 bar, 500 kPa Increments (small): Small incremental weight sets available Gravity:.......................9.80665 m/s2 (international standard) ....................Local gravity available (specify when ordering) Piston/cylinders:..........................Single or dual (as ordered) Columns:.....................................Single or dual (as ordered) Weight sets:................................Single or dual (as ordered) Pressure source:.....................Lever action, hand-actuated, .................................................dual volume hydraulic pump Medium:.....................Distilled water/alcohol mix (standard) ........................or AAA oil (optional) (specify when ordering) Reservoir capacity:...........................................1.23 l / 75 in3 Displacement (high range):................................................... .......................... 2.8 to 3.2 cm2 / 0.17 to 0.20 in3 per stroke Displacement (low range):..................................................... .................. 0.30 to 0.40 cm2 / 0.018 to 0.024 in3 per stroke Wetted surfaces:...............300 series stainless steel, monel O-rings:.......................... Buna N (standard), EPT (optional), ................................Viton (optional) (specify when ordering) Test connections: ................1/4” NPT, 1/2” NPT, 7/16 UNF .................... - 1/4” BSP and 1/2” BSP (with metric models) Weight material:.. Hard, non-magnetic alloy (imperial units), .......stainless steel ( ±0.015% imperial and metric models), ........................... aluminum (small incremental weight sets) Engineering units:................................ psi, kg/cm2, bar, kPa Cases:........... up to 4 (model and configuration dependent) PHYSICAL SPECIFICATIONS Weight: Tester & Case:.............................................. 22.7 kg / 50 lbs Weight Sets:....................... 25 kg to 95.3 kg / 55 to 210 lbs Configuration:......................... Single or dual piston/cylinder ........................ single or dual column hydraulic deadweight Delivery:.......Pump, piston(s), weight set(s), tools, manifold, ........ adapters, column base, tubing (dual-column models), ..............................manual, and NIST traceable certification |