Offering all the features and functions of their CPF line of quick-test pressure fittings, Crystal Engineering has introduced their MPF-1/4FPT CPF Pressure Fitting with a NPT female connector.
See the other range of CPF Fittings and Hoses from Crystal Engineering below.
(A) 0.75" (19 mm)
(B) 1.40" (36 mm)
Specifications
PERFORMANCE
Maximum Allowable Working Pressure (MAWP):
10 000 psi / 700 bar / 70 MPa
Most fittings thoughout this document meet the MAWP specificaton of 10000 psi / 700 bar / 70 MPa. Exceptions are labeled with an icon ( 5 or 15 ) and a key to indicate the pressure rating. Non-Crystal MP adapters require wrench tightening.
Finger-tight:
-20 to 50°C
Wrench-tight:
-40 to 150°C
Minimum Hose Bend Radius:
1.0" (25mm)
CONSTRUCTION
Thread Type:
7/16-20 UNF 2B
Cone Angle:
60°, nominal
Fittings:
High Strength 316 Stainless Steel
Hose is not compatible with dioctyl sebacate fluid.
Hose:
Polyamide core with urethane jacket
External Hose Diameter:
0.235" (6 mm)
Internal Hose Diameter:
0.08" (2 mm)
Hose Weight:
0.0179 lbs/ft (26.6 g/m)
CAUTION: To achieve CPF maximum allowable working pressures no o-ring substitutions are allowed.
CPF Female O-rings:
AS568A-012, Viton® 80 or 90 #3981
O-ring Lubricant:
Molykote® 55
RECOMMENDATIONS
Thread Lubricant:
Use a process compatible fluid
Wrench Torque:
100–140 in-lbs (11.3–15.8 Nm)
If a torque wrench isn’t practical to use, hand tighten then tighten an additional 20 degrees using a wrench.
The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.