The AMETEK HydraLite HLG Gauge is a precision, portable instrument used to accurately measure pressure in field conditions. The HydraLite HLG gauge may be used as a primary standard instrument where a high accuracy reference measurement is needed. Simply connect the gauge to the process and add weights until there is a proper float. Standard accuracy is ±0.1% of indicated pressure traceable to the U.S. National Institute of Standards and Technology (NIST). The instrument may also be specified with +0.05% accuracy.
If you initially need a gauge and later find that you need a full tester, an accessory kit is available to incorporate the screwpump into the gauge.
Specifications
FUNCTIONAL SPECIFICATIONS Model:..................................................................... HydraLite HL and HLG Type:.......................................................................Hydraulic, piston gauge Pressure range:.................... to 22,500 kPa / 3,000 psi (model dependent) Accuracy (12 months):....................................................... to ±0.050% rdg Increments (low - min):...................0.1 psi, 0.005 kg/cm2, 5 mbar, 0.5 kPa Increments (high - min):...............0.5 psi, 0.025 kg/cm2, 25 mbar, 2.5 kPa Gravity:..............................................9.80665 m/s2 (international standard) Piston/cylinders:................................................ Single or dual (as ordered) Columns:............................................................................................ Single Weight sets:...................................................................Single (as ordered) Pressure source:............................................Screwpump, hand-actuated, ........................................................... hydraulic pump (tester models only) Medium:........................................................................................... AAA oil Reservoir capacity:...............................0.24 l /14.4 in3 (tester models only) Wetted surfaces:..................... 300 series stainless steel, brass, aluminum O-rings:.............................................................................................Buna N Test connections:................................................... 1/4” NPT and 1/2” NPT Weight material:.......................... Hard, non-magnetic alloy and aluminum Engineering units:....................................................... psi, kg/cm2, bar, kPa Cases:.............................................................................. 1 (self-contained) PHYSICAL SPECIFICATIONS Tester size (L x W x H):..................... 22.9 x 22.9 x 25.4 cm / 9 x 9 x 10 in Weight:..................................................................................20.4 kg / 45 lb Configuration:................................................ Single or dual piston/cylinder ............................................single column hydraulic deadweight or gauge Delivery:..........................Pump (tester), piston(s), weight set, tools, gauge ...........................post, adapters, manual, and NIST traceable certification
The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.