Input | RTD’s and Resistance | Pt100 (IEC751, α = 0.00385) | 3-, 4-wire connection -200 to +1000 °C / -328 to +1832 °F | Pt1000 (IEC751, α = 0.00385) | 3-, 4-wire connection -200 to +200 °C/ -328 to +392 °F | PtX 10 ≤ X ≤ 1000 (IEC751, α = 0.00385) | 3-, 4-wire connection Upper range depending on X-value | Ni100 (DIN 43760) | 3-, 4-wire connection -60 to +250 °C / -76 to +482 °F | Ni1000 (DIN 43760) | 3-, 4-wire connection -60 to +150 °C / -76 to +302 °F | D100 (Pt 100 acc.to JIS1604, α = 0.003916) | 3-, 4-wire connection -200 to +1000 °C / -328 to +1832 °F | Potentiometer/resistance | 3-, 4-wire connection 0 to 2000 Ω | Sensor current | ~ 0.4 mA | Maximum sensor wire resistance | 25 Ω/wire | Thermocouples and Voltage | T/C | Type: AE, B, E, J, K, L, N, R, S, T, U Ranges according to users manual | Voltage input | -10 to +500 mV | Input impedance | >10 MΩ | Maximum sensor wire resistance | 500 Ω (total loop) | Monitoring | Sensor break monitoring | User definable output 3.5 to 21.6 mA | SmartSense, sensor isolation monitoring | User definable output 3.5 to 21.6 mA | Adjustments | Zero adjustment | All inputs Any value within range limits | Minimum spans | Pt100, Pt1000, Ni100, Ni1000 10 °C / 18 °F | | Potentiometer 10Ω | | T/C, mV 2 mV | Output | Straight,reversed or any intermediate value | 4-20/20-4 mA | Resolution | 5 µA | Minimum output signal | Measurement/Failure 3.8 mA / 3.5 mA | Maximum output signal | Measurement/Failure 20.5 mA / 21.6 mA | Permissible load | IPAQ-H 795 Ω @ 24 VDC, 22 mA | | IPAQ-HX 725 Ω @ 24 VDC, 22 mA | Temperature | Ambient, storage | -40 to +85 °C / -40 to +185 °F | Ambient, operation | IPAQ-H -40 to +85 °C / -40 to +185 °F | | IPAQ-HX See Intrinsic Safety specifications | General data | Selectable dampening time | ~ 2 s | Update time | ~ 1.5 s | Isolation In - Out | Isolated version 1500 VAC, 1 min | Humidity (non-condensing) | 0 to 95 %RH | Intrinsic safety | IPAQ-HX, ATEX II 1 G EEx ia IIC T4, T5, T6 | | FM Class I, Div. 1, Group A-D, T4 | Power supply, polarity protected | Supply voltage | IPAQ-H 6.5 to 36 VDC 2-wire | | IPAQ-HX 8.0 to 30 VDC 2-wire | Permissible ripple | 4 V p-p @ 50/60 Hz |
Accuracy | Linearity | RTD Potentiometer, mV ±0.1 % 1) | | T/C ±0.2 % 1) | Calibration | RTD Max. of ±0.2 °C / ±0.4 °F or ±0.1 %1) | | Potentiometer Max. of ±0.1 Ω or ±0.1 %1) | | mV, T/C Max. of ±20 µV or ±0.1 %1) | Cold Junction Compensation (CJC) | T/C ±0.5 °C / ±0.9 °F | Temperature influence 4) | All inputs Max. of ±0.25 °C/25 °C or ±0.25%/25 °C1) 3) | | Max. of ±0.5 °F/50 °F or ±0.28%/50 °F1) 3) | Temperature influence CJC 4) | T/C ±0.5 °C/25 °C / ±1.0 °F/50 °F | Instrument calibration output | 4-20 mA ±8 µA | Sensor wire resistance influence | RTD, Potentiometer, 3-wire Negligible 2) | | RTD, Potentiometer, 4-wire Negligible | | mV, T/C Negligible | Load influence | Negligible | Power supply influence | Negligible | RFI influence, 0.15 to 1000 MHz, 10 V or V/m | ±0.1% 1) (typical) | Long-term stability | ±0.1 % 1) /year | Housing | Material / Flammability (UL) | PC + ABS/V0, Polyamide/V2 | Mounting | DIN B-head or larger, DIN rail (with mounting kit) | Connection | Single/stranded wires ≤1.5 mm2, AWG 16 | Weight | 50 g | Protection, housing / terminals | IP 50 / IP 10 |
1) Of input span 2) With equal wire resistance 3) If zero-deflection > 100% of input span: add 0.125% of input span/25 °C or 0.14% of input span/50 °F per 100% zero-deflection 4) Reference temperature 23 °C / 73 °F Intrinsic Safety Specifications Specifications | IPAQ-HX, isolated IPAQ-HX, isolated | Approval | Demko / ATEX Factory Mutual (FM) | Classification | II 1 G EEx ia IIC T4-T6 IS for use in Class I, Div. 1, | | T4/+85 °C, T5/+65 °C, T6/+50 °C Group A-D, T4/+80 °C | Certificate No. | DEMKO 02 ATEX 132033 J.I. 0D6A8.AX, Dr w. 3-7851 | Output/Supply | Max voltage to transmitter | Ui = 30 Vdc Vmax = 30 Vdc | Max current to transmitter | Ii = 100 mA Imax = 100 mA | Max power to transmitter | Pi = 900 mW Pmax = 900 mW | Internal inductance | Li = 0 mH Li = 2.5 mH | Internal capacitance | Ci = 0 µF Ci = 0 µF | Input (Sensor) | Max voltage from transmitter | Uo = 30 Vdc Voc = 30 Vdc | Max current from transmitter | Io = 25 mA Isc = 25 mA | Max power from transmitter | Po = 188 mW Not specified | Max inductance (input loop) | Lo = 50 mH La = 56.8 mH | Max capacitance (input loop) | Co = 66 nF Ca = 0.12 µF |
|