The VT30 is a multifunction voltage tester with continuity and phase testing built-in. A flash light function makes it ideal for use in low light plant conditions.
Specifications
LCD display 1999 counts (3-1/2 digits) with bargraph and backlight Resolution 1 Volt AC Voltage range 0 to 480V ACV frequency range 50/60Hz DC Voltage range 0 to 690V Accuracy ACV ±(1.5%rdg + 5d); DCV ±(1.0%rdg + 3d) Range selection Automatic Max measuring current ≤1.0mA (400VAC); ≤1.5mA (690VDC) Response time Updates 2-3 times/sec Input Impedance 1MΩ (approx) Continuity test Range 0 to 200kΩ, guaranteed on < 50kΩ; <5μA test current Overvoltage protection 480VAC/690VDC Low impedance test 12-250VAC/DC; impedance <6kΩ; LCD enable input voltage >4.5V AC/DC Operation time: 5s<250V AC/DC Power supply 2 x “AAA” 1.5V alkaline batteries Battery life Approx. 8 hours continuous use typical Operating Temperature 14 to 131oF (-10 to 55oC) Storage Temperature -22 to 140oF (-30 to 60oC) Operating Humidity 10 to 85% RH (non-condensing) Safety This meter is intended for origin of installation use and protected, against the users, by double insulation per EN61243-3 and EN61010-1 to Category IV 600V and Category III 600V; Pollution Degree 2. Approvals CE, IP64 Dimensions 9.4 x 3 x 1.6”(240 x 78 x 40mm) Weight 9.2oz (260G)
The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.