The Rotronic HygroLog HL20 measuring range is from 0 to 100 %RH / -10 to 60 °C.
The HL20 is a humidity temperature data logger that is designed for recording surrounding conditions in indoor areas such as research labs, high-tech manufacturing facilities and warehouses, storage areas and containers for sensitive goods, museums, office buildings, and so forth. The HL20 is completely agreeable with FDA 21 CFR part 11 and GAMP 4 necessities for electronic records and electronic signatures (ERES).
AirChip3000 • Temperature compensates humidity with over 30000 reference points • Dew/frost point calculation • Sensor auto-diagnostics and automatic correction • Active alarming and information • Conforms to FDA21 CFR Part 11 and GAMP4 (audit trail)
Optional display • Display of data on a clear, backlit graphic display • Battery charge indicator • Display of measured and calculated data • Function key to start and stop logging • Display resolution to 2 decimal places
Data logging function • Logs up to 20,000 value pairs, relative humidity and temperature • Each record is date and time stamped (real-time clock) • Adjustable log interval • Two data recording modes: (start-stop or loop)
Alarm function Visible alarm can be programmed for the HL20 detects the following: • Out-of-limits value (defined with HW4 software) • Communication loss with the probe • Sensor failure and sensor drift
Specifications
Device type
Humidity-temperature data logger with internal sensor(s)
Battery type
3 x AA (1.5 V) alkaline
Battery life
Depends on log interval and other settings. Examples based on a 30 minutes log interval: - Models w/o LC display: 20 months - Models with LC display, display sleep function set to 1 minute: 13 months
Low battery indication
Yes (with HW4 software or with optional display)
Measuring range
0…100 %RH / -10...60 °C
Measurement accuracy at 23 °C
±0.8 %RH @ 10..60 %RH / ±0.3 °C ±1.3 %RH @ 60..100 %RH / ±0.3 °C
Repeatability
0.3 %RH / 0.05 °C
Long term stability
<1 %RH / year / < 0.1 °C / year
Response time
Humidity: typical 3 min. Temperature: typical 10 min. (both depend on air flow)
Psychrometric calculations
Dew or frost point (user configurable setting)
Start-up time
1.9s (typical)
Data refresh rate
1.7s (typical)
Recording capacity
20,000 value pairs
Real time clock
Yes, adjustable via PC
Logging modes
Start-stop (recording stops when memory is full) Loop: oldest data is dumped to make room for latest data
LC, 1 or 2 decimal resolution, backlight, alarm and low battery indication
LED indicator
5 sec. green flash when recording data 5 sec. red flash for out-of-limit value or logger problem
Housing material
ABS
Housing protection grade
IP 40
Weight
About 210 g (7.4 oz)
Solder type
Lead free (RoHS directive)
FDA / GAMP directives
Compatible
Operating limits
-10….60 °C (models w/o display) 0….50 °C (models with display) 0…100 %RH, non condensing
Overall dimensions
130 x 72 x 32 mm (5.1 x 2.8 x 1.3”)
Dimensions
The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.