Model ADT680: Regular version ADT680W: Data logging and wireless version Pressure Type: Gauge Performance Accuracy: 0.05%FS, 0.1%FS or 0.25%FS Update Rate: 10 times/Sec ,3 times /Sec (default), 1 time /Sec ,1 time/15 Seconds Operating Temperate: 14°F to 122°F (-10°C to 50°C) Compensated Temperate: 14°F to 122°F (-10°C to 50°C), accuracy Guaranteed Storage Temperature: -4°F to 158°F (-20°C to 70°C) Overload Pressure: 1.2X Power Supply Battery: 2 x AA alkaline (LR6) batteries Recommend: Duracell MX1500, EnergizerE91, Panasonic LR6, Duracell 15AU Usage Period: 10/Sec:1500Hours; 3/Sec: 3,000Hours; 1/Sec: 6000Hours; 1/15Sec: 12,000Hours Rated Power: 3.0VDC Imax=30mA Pmax=90mW Material Wetted Surface: All wetted surfaces are 316L Stainless Steel with welded design (no O-ring, thread tape, epoxy, or sealant on any part of the sensor assembly) Case: PC+ABS Protective Cover: Silicone Rubber (Optional) Display LCD Specification: FSTN-LCD,Visual scope 36x61mm; Full 5 digits,15.2mm High; 7 segment analog bar graph scaled from 0~100% of FS Backlight: White Wireless Communication (ADT680W only) Wireless Frequency: 2.4G ISM Bands, 20 meter range Number of wireless Channels : Chanel 1~15 Software: Wireless network demo software for free Data Logging (ADT680W only) Storage Capacity: 140,000 readings(time, pressure, and temperature) Storage Interval: Adjustable from 1~9999 Sec Compliances Certificates:CE RTTE, FCC ID, IC ID Protection Level: IP67 Vibration: 5g(20~2000Hz) Shock resistance: 100g/11ms Others Dimensions: 100mm x 40mm, total height:157mm Weight: 500g Fitting: 1/4NPT, G1/4, M20×1.5, or custom-made Auto off: Disabled,15, 30, 45, 60, 90, 120 Minutes optional. Filtering: Averaging (3 to 10 samples) or low-pass first-order filter. Engineering units: Pa, kPa, MPa, bar, mba, psi, kgf/cm2, mmH2O, mmHg, inH2O, inHg, ozf/in, %, °C, °F. extend units: inH2O(20°C), inH2O(60°F), mmH2O(20°C), mmH2O(15°C), ftH2O(60°F), ftH2O(4°C) Backlight Duration: Not auto off,15,30,45,60 seconds optional. Max/Min data capture: Saves Max and Min data during pressure measurement. Key Lockout: When the gauge is in auto-storing mode, the front panel buttons will be automatically locked. Overpressure Alarm: Display will flash over 120%FS Battery voltage Indicator: Displays the battery life remaining. When the battery voltage is too low, the gauge will power-off automatically. Overpressure Record: Gauge will record max pressure data when the gauge is over pressured by 120% of FS. Leakage test: In leak test mode, the gauge will record beginning pressure, ending pressure, and show the difference ΔP. Factory Reset: Resets all settings back to factory default, except the calibration parameters. Warranty: 1 year Gauge Pressure | P/N | Pressure Range | Media[2] | Accuracy(%FS) | Burst Pressure | (psi)[1] | (bar) | V15 | -15 | -1.0 | G | 0.05(0.1, 0.25) | 3× | GP15 | 15 | 1.0 | G, L | 0.05(0.1, 0.25) | 3× | GP30 | 30 | 2.0 | G, L | 0.05(0.1, 0.25) | 3× | GP100 | 100 | 7.0 | G, L | 0.05(0.1, 0.25) | 3× | GP300 | 300 | 20 | G, L | 0.05(0.1, 0.25) | 3× | GP500 | 500 | 35 | G, L | 0.05(0.1, 0.25) | 3× | GP1K | 1,000 | 70 | G, L | 0.05(0.1, 0.25) | 3× | GP3K | 3,000 | 200 | G, L | 0.05(0.1, 0.25) | 3× | GP5K | 5,000 | 350 | G, L | 0.05(0.1, 0.25) | 3× | GP10K | 10,000 | 700 | G, L | 0.05(0.1, 0.25) | 2× | GP15K | 15,000 | 1,000 | G, L | 0.05(0.1, 0.25) | 2× | GP20K | 20,000 | 1,400 | G, L | 0.05(0.1, 0.25) | 1.5× | GP25K | 25,000 | 1,600 | G, L | 0.1(0.25) | 1.5× | GP30K | 30,000 | 2,000 | G, L | 0.1(0.25) | 1.5× | GP36K | 36,000 | 2,500 | G, L | 0.1(0.25) | 1.5× | GP40K | 40,000 | 2,800 | G, L | 0.1(0.25) | 1.1× |
Note: [1]. Sealed gauge pressure for above 1000 psi [2][3]. G=Gas, L=Liquid (please specify media type when place order) |