The Simpson Falcon Series digital indicators are premium quality 1/8 DIN meters for industrial applications. Two input ranges are available, 20-199.9Hz or 20-1999Hz, with choice of RMS or Square Wave. The Falcon has a 0.56" bright red LED display for high visibility. Compactly designed for applications requiring minimal rear panel depth, the Falcon fits a standard 1/8 DIN panel cutout (92mm x 45mm) and requires less than 3" behind the panel. A screw terminal connector is a standard feature for easy wiring of the power supply and signal input connections.
Specifications
DISPLAY
Type
7- segment, red LED
Height
0.56” (14.2mm)
Overrange Indication
Most significant digit = “1”; other digits blank
POWER REQUIREMENTS
AC Voltages
120 or 220VAC, ±10% 50/60Hz
Power Consumption
2.5VA min./4VA max.
ACCURACY @25°C
200 Hz
±0.2% of input ±0.2 Hz
2 KHz
±0.2% of input ± 2Hz
INPUT LEVEL
500mV to 250V RMS at 1.0MΩ impedance
OR 5V to 24V Square Wave (DCoffset 2V maximum)
Resolution
200Hz = 0.1Hz
2kHz =1Hz
ENVIRONMENTAL
Operating Temperature
0 to 55°C
Storage Temperature
-10 to 60°C
Relative Humidity
0 to 85% non-condensing @ 40°C
Temperature Coefficient
(±0.05% of input ± 0.5 count)/°C
Warm-up Time
Less than 15 minutes
CONVERSION
Technique
Frequency-to-voltage
Rate
3 samples per second, nominal
The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.