The MN185 is a high accuracy mini probe for measurements to 120AAC. This probe uses a special magnetic core to provide higher accuracy and lower phase shift. The MN185 provides an output signal of 1mAAC/AAC. The output termination are standard 4mm banana jacks.
Specifications
ELECTRICAL
Nominal Range
150A
Measurement Range
50mA to 150A
Transformation Ratio
1000:1
Output Signal
1mAAC/AAC (120mA @ 120A)
Accuracy (120A Range)
50mA to 100A
1% of Reading ± 0.01A (with noninductive load)
100 to 120A
1.5% of Reading ± 0.01A
Phase Shift (120A Range) 1 to 100A/ 50 to 60Hz
≤3.5°
Overload Frequency Range
170A continuous 30Hz to 10kHz
Load Impedance
5Ω max
Working/Common Mode Voltage
250VAC/30VAC
Output Termination
Jack
MECHANICAL
Jaw Opening
0.78" (20mm)
Maximum Conductor Size
0.47"Ø max (12mm)
Dimensions
1.26 x 4.53 x 0.87" (32 x 115 x 22mm)
Weight
5.6 oz (160g)
Polycarbonate Material
Handles 10% fiberglass charged polycarbonate UL94 VO
ENVIRONMENTAL
Operating Temperature
13° to 122°F (-25° to 50°C)
Storage Temperature
-40° to 176°F (-40° to 80°C)
Operating Relative Humidity
10 to 35°C 85% RH (without roll-off above 35°C)
SAFETY
Electrical
30V max common between output & ground; 3kV50/60Hz dielectric for 1mm
Note: Reference conditions: 23°C ±3K, 20 to 85%RH, 48 to 65Hz, external magnetic field <40A/m, no DC component, no external current carrying conductor, test sample centered, load impedance 1Ω.
The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.