Skip to the beginning of the images gallery

LMI P75 1 GPH Metering Pump - DISCONTINUED

Be the first to review this product

SKU

P75

Manufacturer:

LMI

Key Features:

This Product is DISCONTINUED

Pulse input with dual manual control
Low level float switch input
1.0 GPH (3.8 l/h) maximum capacity
110 PSIG (7.6 Bar) maximum pressure
Reliable, rugged, high quality design
NEMA 4X/ IP65 Enclosure
Electronics completely encased and provides safety from moisture and corrosive conditions
Compact footprint benefits OEM applications
Time tested electronics for continuous, dependable operation
UL, CUL, NSF 50, NSF 61, CE Certifications

Ship to

Calculate Shipping Cost

Country

State/Province

Zip/Postal Code

Call For Price

Secured and trusted checkout with

Product Detail

Featuring a pulse signal input that controls frequency, a manual stroke length control, and a manually adjustable frequency when in local control, LMI is offering their P75 Metering Pump. The P75 has a 1.0 GPH (3.8 l/h) maximum capacity and 110 PSIG (7.6 Bar) maximum pressure. In addition to its low level float switch input, the meter meets a range of application requirements with its compact size, chemically immune housing and vast array of output options.

Short Description

P75 Specifications:

Gallons per Hour	Liters per Hour	mL/cc per Minute	L/cc per Stroke	Maximum Injection
Min Max	Min Max	Min Max	Min Max	Pressure
0.002 1.0	0.008 3.8	0.13 63	0.13 0.63	110 psi (7.6 Bar)

Strokes per Minute

(Adjustable)

Stroke Length

(Adjustable)

Recommended Minimum

Average Input Power at Max Speed

Shipping Weight

Min Max

1 100

20%

22 watts

7.6 lbs (3.5 kg)

Liquid End Specifications:

Machined LIQUIPRO Liquid Ends
Liquid End	Head / Fittings	Balls	Liquifram	Seat / O-ring	Accs. Valve	Tubing & Connections
490TI	Acrylic / PVC	Ceramic	Fluorofilm	Polyprel	3FV	PE 3/8" O.D.
490SI	Acrylic / PVC	Ceramic	Fluorofilm	Polyprel	4FV	PE 3/8" O.D.
495TI	PP / PP	Ceramic	Fluorofilm	PTFE	3FV	PE 3/8" O.D.
495SI	PP / PP	Ceramic	Fluorofilm	PTFE	4FV	PE 3/8" O.D.
498TI	PVC / PVC	Ceramic	Fluorofilm	Polyprel	3FV	PE 3/8" O.D.
498SI	PVC / PVC	Ceramic	Fluorofilm	Polyprel	4FV	PE 3/8" O.D.
499TI	Acrylic / PVDF	PTFE	Fluorofilm	Polyprel	3FV	PE 3/8" O.D.
499SI	Acrylic / PVDF	PTFE	Fluorofilm	Polyprel	4FV	PE 3/8" O.D.
297	316ss/316ss	316ss	Fluorofilm	316ss/PTFE	-	1/4" NPT M

Molded LIQUIPRO Liquid Ends
Liquid End	Head / Fittings	Balls	Liquifram	Seat / O-ring	Accs. Valve	Tubing & Connections
392TI	PVDF / PVDF	Ceramic	Fluorofilm	Polyprel	3FV	PE 3/8" O.D.
392SI	PVDF / PVDF	Ceramic	Fluorofilm	Polyprel	4FV	PE 3/8" O.D.
393TI	PVDF / PVDF	Ceramic	Fluorofilm	PTFE	3FV	PE 3/8" O.D.
393SI	PVDF / PVDF	Ceramic	Fluorofilm	PTFE	4FV	PE 3/8" O.D.
398TI	PVC / PVC	Ceramic	Fluorofilm	Polyprel	3FV	PE 3/8" O.D.
398SI	PVC / PVC	Ceramic	Fluorofilm	Polyprel	4FV	PE 3/8" O.D.

3FV indicates that the pump is equipped with an LMI Three Function Valve (pressure relief, priming aid, line drain).

4FV indicates that the pump is equipped with an LMI Four Function Valve. This diaphragm type, anti-syhon/pressure relief valve is installed on the pump head. It provides anti-syphon protection and aids in priming, even under pressure.

AUTOPRIME Liquid Ends AUTOPRIME Liquid Ends are used in applications with off-gassing liquids such as Sodium Hypochlorite.
Liquid End	Head / Fittings	Balls	Liquifram	Seat / O-ring	Accs. Valve	Tubing & Connections
D90HI	Acrylic / PVC	Ceramic	Fluorofilm	Polyprel	4FV	PE 3/8" O.D.
D90AI	Acrylic / PVC	Ceramic	Fluorofilm	Polyprel	-	PE 3/8" O.D.
D98HI	PVC / PVC	Ceramic	Fluorofilm	Polyprel	4FV	PE 3/8" O.D.
D98AI	PVC / PVC	Ceramic	Fluorofilm	Polyprel	-	PE 3/8" O.D.

Output Information - AUTOPRIME Liquid Ends (Liquid end models beginning with “D”)

AUTOPRIME liquid ends have 3 check valves: Suction on the bottom; Discharge on the front: Autoprime bleed on the top. By design, a repeatable portion of the process fluid continuously bleeds through the top check valve to be returned to the chemical supply. The result is the assurance that any gas in the head is automatically relieved thus eliminating air-binding. The maximum output per the tables above is reduced to account for the continuous bleed.